User's Manual Part 1

LIP-8012D & LIP-8024D User Guide Issue 1
15 August, 2008
To answer a call ringing at your phone:
• Lift the handset or press the flashing Flex button (as
needed), the call will be connected.
To respond to an Intercom Voice Announce call:
• In HF mode, simply speak as normal into the
microphone,
• OR
• In PV mode, lift the handset to respond.
3. Receiving Calls
3. RECEIVING CALLS
3.1 Answering a Call While Idle
g calls;
Intercom Voice
ine
are answered by
o an iPECS Phone will appear under the
tton.
CO lines or VoIP channels that
external
calls, Delay Ring may be assigned allowing others to
the call rings at your phone.
Calls can be forwarded in some manner from another
user; if providing call coverage for other users, you may
also receive Station Call Coverage calls.
Calls placed on Hold, including Transfers, parked calls,
etc. will recall if left on hold for too long.
ICM Voice Announce calls are answered based on the
ICM Signaling mode at the receiving phone; in Hands-
free (HF) mode, after the splash tone and
announcement, speak normally into the microphone. In
the Privacy (PV) mode, lift the handset to respond. The
ICM Signaling mode can be assigned in
Station
Programming.
The LCD will display the calling number or, if available,
the name of the station or CO/VoIP line, CO Line Name
Display.
There are 3 basic types of incomin
internal/external ringing calls,
Announce calls, and
Hold recalls.
Your phone may be assigned Ringing L
Preference; in this case, calls that ring
lifting the handset. Otherwise, you must press the
flashing Flex button.
External calls t
CO/IP line or a LOOP bu
External calls are from
are programmed to ring at your phone. For
answer the call before