User's Manual Part 1

LIP-8012D & LIP-8024D User Guide Issue 1
28 August, 2008
4.2.2
e busy, you
usy signal. You may request
4.2.3 s: Tracking External calls for billing
4.2.4
orarily ‘Lock’ your phone by activating
S, which will disable all dialing from the
o deactivate Temporary COS you must enter
zation code.
Waiting for the next available CO/IP line
the lines connected to your system arIf all
will receive an All Trunks B
to be notified when a line becomes free.
Account Code
In some cases, you or your company may desire to
track calls for billing or other purposes. You may enter
an Account Code, which is output from the system to a
printer in the SMDR report. You may have an
Account
Flex button (refer
Code
to Assigning features to Flex
buttons).
Disable dialing from your phone
To activate a q aled line is busy:
• Select the desired CO/IP line button; when the busy
notification is returned, press the
MSG button,
ueue if the selected/di
• Return to a
is availab
n idle state by going on-hook; when the line
le, the Station will be notified (ringing).
To enter an Ac
• Lift the ha
• Press the
count Code before the call:
ndset,
assigned
ACCOUNT CODE button,
• Dial the A
• Press *, I
• Place the CO/IP call as normal.
To enter an Ac
• Press the
ccount Code (1-12 digits),
ntercom dial tone is heard,
count Code during a call:
assigned
ACCOUNT CODE button,
• Dial the A
• Press *.
ccount Code (1-12 digits),
You can temp
Temporary CO
phone. T
the station’s Authori
To activate Temporary COS:
• Press
TRANS/PGM,
• Dial 21 (User Program code),
• Press
HOLD/SAVE.