User's Manual Part 1
Table Of Contents
- Introduction
- LCD, Speakerphone & Related Features
- Receiving calls
- Placing a call
- Transfer, Conference & Other Call Handling
- Send & Retrieve Messages
- Remote System Access
- Misc. Features
- PBX, Centrex & ISDN features
- Features & Flex buttons
LIP-8012D & LIP-8024D User Guide Issue 1
49 August, 2008
8.6 Wake-Up Alar
larm by lifting the handset,
BGM will be provided.
8.7 Alarm/Door B
ed and the Alarm Ring signal
unique Door Bell Ring (single tone burst)
may be received each time the external contact is
d to act
as a Door Open contact.
m
iPECS supports an Alarm clock for each station in the
system. The alarm clock can be set to repeat daily or
as a one-time alarm.
When responding to the a
To set the Wake Up Alarm clock:
• Press
TRANS/PGM,
• Dial 41 (Alarm Clock code),
• Dial 2-digit hour and minute for alerting,
• For a daily (repeating alarm), press #,
• Press
HOLD/SAVE.
To erase Wake-Up:
• Press
TRANS/PGM,
• Dial 42 (Alarm Clock delete code),
• Press HOL SAVE. D/
ell
The system can monitor external Alarm or Door Bell
contacts:
Alarm Monitor—should the external contact activate, a
unique Alarm Ring signal and LCD display may be
received. To restart the monitor circuit, the external
contacts must be deactivat
terminated.
Door Bell—a
activated. A system contact also can be assigne
To r
top code).
te minate the Alarm signal:
• Dial 565 (Alarm S
To activate the Door Open contacts:
• Lift the handset,
• Dial Door Open code, #* and contact number 1-4.