User's Manual Part 1

LIP-8012D & LIP-8024D User Guide Issue 1
53 August, 2008
9. PBX, CENTREX & ISDN FEATURES
PECS has been designed to operate with a host
rvices from your service
nnects to a host with analog CO
t as an
host
st dial codes. While on a
feature to transfer calls to
other host extensions or access features of the host.
The Flash feature may be used on other CO lines to
regain dial tone from the CO line without relinquishing
control of the CO line to place another call.
9.2 Access the ISDN Network
9.2.1 Using the Keypad facility to access ISDN
features
Access to certain features of your ISDN services
requires that dialed digits be sent to the ISDN as data
and not tones. In this case, dialed digits are sent as
‘Keypad messages’.
A Keypad Facility button must be assigned using the
Flex Button program procedures. Once active, dial into
the ISDN for services; however, actions other than
dialing will deactivate the Keypad Facility operation.
9.1 Access PBX or Centrex features
The i
PBX system or Centrex se
provider. The iPECS co
lines.
When accessing a CO line, the phone will ac
extension of the host, allowing access to the
system features using the ho
call, use the iPECS Flash
To access PBX or Centrex features while idle:
• Lift the handset,
• Select/dial access a PBX/Centrex CO line,
• Dial PBX/Centrex feature code.
To access PBX/Centrex features while on a PBX/Centrex
CO line:
• Use the Navigation button to display the next menu,
and select the
Flash soft button,
• After receiving new dial tone, dial the PBX/Centrex
feature code.
9. PBX, Cent
ISDN Feat
rex, &
ures