User's Manual Part 1

LIP-8012D & LIP-8024D User Guide Issue 1
54 August, 2008
9.2.2
sis, and as
with Centrex, are accessed using the
Flash button on an
upplementary services an ISDN line can be
placed on the line.
the two held calls
hold button. An ISDN line
To activate Keypad Facilit
the
KEYP C
y operation:
b
Using ISDN Supplementary Services
ISDN service providers may incorporate features similar
to those of Centrex. These ISDN Supplementary
services are provided on a subscription ba
iPECS phone.
Using s
placed on Hold and a second call
e between You may then alternat
(Broker Call) using the
conference can be established using the
Flash and Conf
Soft buttons. A conference can also be placed on hold.
9.2.3 A SDN Caller ID Restriction
outgoing, Connected Line (COL),
ctivating I
iPECS Phone users can restrict the transmission of
Caller ID to the far-end. This may be a subscription
service of your carrier. Separate Flex buttons are
required to activate
and incoming, Calling Line ID (CLID) restriction.
• Press
AD FA ILITY utton to switch to keypad
mode
• Dial
,
as de
To deactivate
• Press
KEY
sired.
Keypad Facility operation:
PAD FACILITY,
• OR
• Press a Feature or Flex button.
Whil s ISDN Supplementary
se i
•
e on an ISDN CO line, to acces
rv ces:
Press Flash,
• Press
HOL /SAVE, ConfD , or CO line button to activate
the desired feature.
To restrict Cal
• Lift the handset,
• Press programmed
CLIR/COLR button to place call.
ler ID: