LSP-430G EN_090303 2009.3.3 11:12 AM 페이지1 LSP-430G USER GUIDE Please read this manual carefully before operating your set. Retain it for future reference.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지2 Highlights Highlights Congratulations on your subscription to the LSP430G Fixed Wireless phone. This phone has been designed to operate on the IS-2000 Air Protocol over the 800MHz band. And the phone has the advanced user interface similar to mobile phone. It has greatly enhanced voice clarity and provides various advanced features.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지3 CONTENTS 4 4. Menu Tree 20 1.1 1.2 1.3 1.4 4 4 5 6 4.1 4.2 4.3 4.4 4.5 4.6 4.7 24 26 31 33 36 37 43 Safety Instruction Optimal Phone Performance Care and Service Safety Information 2. Introduction 2.1 2.2 2.3 2.4 Front View of the Phone LCD Display Installation Installation Steps 9 9 10 11 14 3. Basic Operations 15 3.1 3.2 3.3 3.4 3.5 3.6 3.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지4 1. Important Information quality and damage the phone. Important Information 1.1 Safety Instruction ᶀ RF energy may affect improperly installed or inadequately shielded personal medical devices such as pace-makers or hospital monitors. Consult the manufacturer of any personal medical devices to determine whether they are adequately shielded from external RF energy.
Regulatory Statements to be included in the Users Guide for Sputnik USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지5 1. Important Information 1.3 Care and Service ᶀ Use battery, antenna and AC/DC power adapter provided by LG-Nortel . Using parts made by any other manufacturer may invalidate the warranty. Before cleaning, always unplug the phone from the wall outlet and remove the antenna (or disconnect the antenna cable). Do not use liquid or aerosol cleaners; use a damp cloth for cleaning. ᶀ Only authorized personnel should service the phone and its accessories.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지6 1. Important Information Important Information 6 CAUTION 1.4 Safety Information ᶀ WARNING ᶀ For safety, use only an adapter approved by LG-Nortel . ᶀ LG-Nortel does not bear responsibility for any faults that may arise due to non-conformation to this guide. Example: LSP-430G Do not use the phone with a car battery. It may cause electric shock, fire, breakdown or transformation. Avoid using the phone in high temperature or humidity.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지7 1. Important Information ᶀ Do not attempt to open it. Nonexpert handling of the device could damage it. It may cause fire, electric shock and breakdown. Consult your authorized LG-Nortel dealer for assistance. ᶀ Do not drop, knock or shake the phone. Rough handling may break the internal circuit boards. ᶀ Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지8 1. Important Information Important Information 8 ᶀ Do not plug many power cords into one outlet. It may cause fire or electric shock. ᶀ Do not remodel the power cord or disassemble it. If the power cord or plug is impaired, do not use it. It may cause fire or electric shock ᶀ Do not install the phone in an illventilated place. It may cause fire or a breakdown. ᶀ Do not touch the plug with wet hands.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지9 2. Introduction ῡ Soft key 1 : Activates Menu state ② Dial/Flash : Activates Dial or Flash state, make it possible to redial from call history Introduction 2.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지10 2. Introduction Introduction 2.2 LCD Display The LCD shows icons on the top of the LCD screen. Different indicators appear based on the phone's operating mode. Icon Operating Condition RSSI indicator: Indicates the signal strength in the service area. No service: The phone is not receiving any system signal. Roaming Service Bell (Light : ).
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지11 2. Introduction 2.3 Installation CDMA Fixed Wireless Phone.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지12 2. Introduction STEP I. Check Components Introduction ᶀ ᶀ ᶀ The following components are supplied for Fixed Wireless Phone. 1. LSP-430G Main Phone with Handset -1EA- 2. Dipole Antenna -1EA- STEP III. Connect Components (Please refer to “Installation Steps” in 2.4) 3. AC/DC Power Adapter -1EA- ᶀ 4. User Guide -1EA- Connect the antenna to the TNC antenna connector located at the top of the phone.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지13 2. Introduction ᶀ STEP IV. Check the LCD Display ᶀ After you follow the installation instruction step I to step III, please check the LCD for normal operation. ᶀ If you do not see the status of service, please repeat the 4th instruction of step III. 1. Keep away from electrical appliances such as TV, computer, radio etc. 2. Keep the phone in a high and central location without any obstructions. 3.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지14 2. Introduction Introduction 2.4 Installation Steps Please follow the procedure below to install the phone properly. 1 Connect basehandset to the handset connector. 3 Connect the antenna to the TNC connector (Turn right). 4 Connect the AC power supply. 14 2 Press END button to operate initially.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지15 3. Basic Operations 1. Pick up the handset or press You can make a call as follows. 2. Listen for dial tone. 1. Pick up the handset or press button. 2. Listen for dial tone. 3. Enter the phone number with area code if needed. 4. Wait for the Auto Dial Time-out or Press D i a l / F l a s h button. 5. The call is connected and you may start conversation. 6. To disconnect the call, replace the handset or press button.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지16 3. Basic Operations using the new lock code within the security set Menu. Basic Operations 3.4 Volume Control 1. Press U p / D o w n button of navigation while in a call, to adjust Earpiece volume. * Also, you can lock your phone manually and change your default password as explained [4.6.4 page no.40] Under Lock Mode 3.5 Receiving a Call 1. Press ‘0’ button for some time.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지17 3. Basic Operations Key Functions - You can scroll through the modes using Soft key 2 in the following - Shift key : Used to change the letter case. In Abc Mode, it switches 3-types of letter case such as Abc, ABC, abc. - . key : In Abc mode, press to insert sentence mark ( . , - ? ! ‘ @ : 1 ) - SPACE key : Press to complete a word or insert a space. - Clear key : Press to delete a single space or character. Press and hold to delete entire words.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지18 3. Basic Operations Basic Operations - Templates : You can use predefined message in the phone memory immediately. This mode is very useful for save your time. Examples Using ABC Text input Typing In ABC(Multi-tap) Mode For example, to type “MANUAL”, follow these steps: Initial Cap(Abc) Only the first letter is capitalized. 1. Press: Soft key 2 to change letter case Abc mode. Caps Lock(ABC) 2. Press: Shift key to change to ABC Caps Lock mode.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지19 4. Menu Tree Main Menu Sub-Menu 2. Add 1. Names 2. Messages Setting Value Name Search / Number Search Name / Mobile / Home / Office / General / E-mail / Memo / Ring 3. Speed Dial Options / Erase 4. Erase All Names Yes / No 1. Write Abc / 123 / Symbols / Smileys / Templates/Fra 2. Inbox View / Erase 3. Outbox View / Erase 4. Voice Mail Erase 5. Broadcast box View / Erase 6. Archive View / Erase 7. Drafts View / Erase 8.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지20 4. Menu Tree Main Menu Sub-Menu Menu Tree 0. Erase Message *. Message Settings 3. Call History 4. Sound 20 Setting Value Erase Inbox / Erase Outbox / Erase Broadcast box / Erase Archive / Erase Drafts / Erase All Messages Priority / Delivery Ack / Deferred Delivery / Validity Period / Save Sent Message / Auto Delete Inbox 1. Missed View / Erase 2. Received View / Erase 3. Dialled View / Erase 4. In Call Memo View / Erase 5.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지21 4. Menu Tree Main Menu Sub-Menu 5. Display Setting Value Alert Type / Alert Tone / Message Reminder 1. Language English/Français 2. Wallpaper Idle Screen / Banner 3. Menu Style List / Icon 4. Backlight Off / 10 Secs / 30 Secs / Night Only / Always On 5. Contrast Option setting (Bar 0 ~ Bar 8) 1. Add to My Menu Names / Messages / Call History / Sound / Display/ Menu Tree 7. Message Alert Settings / Organiser 6. Settings 2.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지22 4. Menu Tree Main Menu Menu Tree 7. Organiser 22 Sub-Menu Setting Value 1. Scheduler OK / Add 2. Alarm Options / View 3. Memo View/ Add 4. Calculator OK / Back 5. World Clock DST / Back 6.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지23 4. Menu Tree - Memo: You may select from four Sub-Menus (Find, Add, Speed Dial, Erase All Names) for this item. If you press Soft Key1, Menu is activated. - Ring: ●●●●●● Dial/Flash Soft Key 1 ●●●●●● Soft Key 2 To scroll in Menu, press ᵋ, ᵍ ,ᵾ or ᶀ button. To return to the initial screen, press E N D button and to return to the previous screen, press C l e a r button. * In this menu, All sorts of the icon have the meaning as follows: - Name of person : 4.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지24 4. Menu Tree 4.1.2 Add Menu Tree You can save upto 500 entries in your LSP-430G phonebook. You can store multiple contact details under a Name: Mobile Number, Home Number, Office Number, General Number, E-mail address of the contact. You can also add any additional details about the contact like the Person’s birthday , favorite things etc in Memo. Lastly, there is an option to assign a Ring tone to a Name. 1.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지25 4. Menu Tree Text messaging, page and voice mailbox become available as soon as the power is on. You may access the above type of messages using the Messages ( ) key. The phone can store upto 50 messages in each Inbox and Outbox. And the phone can also store upto 50 messages in Archive, 30 messages in Drafts, 30 messages in Templates, 5 SMS Groups with 10 Entries per Group.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지26 4. Menu Tree 4. Enter phone number or press O p t i o n s . Menu Tree O p t i o n s : can select F i n d , S M S G r o u p s . 5. Select options as following. Priority: Allows you to give priority to Message as N o r m a l or U r g e n t . Delivery Ack: This function allows you to know whether the Messages have been successfully transmitted to the recipient. If you want to activatethis function, set to O n or O f f .
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지27 4. Menu Tree 4.2.3 Outbox 1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) + Menu Tree All your successfully sent messages are saved here. 2. Pick up the handset or press button to make a call back your voice mailbox if the number of the voice mailbox is provided by the telecom service company’s system. 3 ( O u t b o x ) in on-hook state. 2. To erase message, select E r a s e . 4.2.5 Broadcast box 3. To view desired message, select V i e w .
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지28 4. Menu Tree 2. To erase message, select E r a s e . Menu Tree 3. To view desired message, select V i e w . 4. You may select options (II n b o x : 1. Erase 2. Reply 3. Forward 4. Save Number O u t b o x : 1. Erase 2. Resend 3. Forward) 4.2.7 Drafts A Draft is a function enabling you to store messages to be sent in Future. A total of upto 30 messages may be saved in Draft.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지29 4. Menu Tree rename the group name. 9 ( S M S G r o u p s ) in on-hook state. 2. Select desired group View : There are five options (1. Send 2. Send to all 3. Replace 4. Erase Member 5. Erase Group) or add new member. Options : There are four options (1. Send 2. Rename 3. Erase Group 4. Erase All). 4.2.11 Message Settings Priority 1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) + Menu Tree 1.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지30 4. Menu Tree 1. I m m e d i a t e 2. A f t e r 3 0 M i n u t e s Menu Tree 3. A f t e r 1 H o u r 4. A f t e r 2 H o u r s Auto Delete Inbox 1. Press Soft key 1 M e n u + 2 ( M e s s a g e s ) + 5. A f t e r 1 2 H o u r s 6. A f t e r 1 D a y *( M e s s a g e S e t t i n g s ) + 7. A f t e r 2 D a y s 6 ( A u t o D e l e t e I n b o x ) in on-hook state. Validity Period 2. Select O n or O f f . 1.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지31 4. Menu Tree 4.3.2 Received - Received : 1. Press Soft key 1 M e n u + 3 ( C a l l H i s t o r y ) + 2 ( R e c e i v e d ) in on-hook state. - Dialled : 2. To erase received calls, select E r a s e . - Missed : 3. To view desired item, select V i e w . - In Call Memo : 4. You may select from three options (1. Erase 2. Send Message 3. Save Number). - 3 Way Call : 4.3.1 Missed 1.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지32 4. Menu Tree Menu Tree 4.3.4 In Call Memo 4.3.6 Erase History “In Call Memo” allows you to make quick notes (numbers only) while call is in progress. While in call, press Soft key 1(Menu), and then select 2 to type in ‘In Call Memo’. You may erase all history from three options (1. Erase Missed 2. Erase Received 3. Erase Dialled) To retrieve an In Call Memo : 1.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지33 4. Menu Tree If you press Soft Key1, Menu is activated. Dial/Flash Soft Key 1 ●●●●●● You may select one ring sound among the 5 Bells or 15 Melodies. Soft Key 2 To scroll in Menu, press ᵋ, ᵍ ,ᵾ or ᶀ button. To return to the initial screen, press E N D button and to return to the previous screen, press C l e a r button. 4.4.3 Ringer Volume Menu Tree ●●●●●● 2. There are two modes (1. Bell 2. Melody).
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지34 4. Menu Tree Menu Tree 2. Select the desired volume level by using the navigation key and press O K . 4.4.5 Key Volume You may select a volume level of key tone sound among the 0 ~ 5 steps. When you select 0 level, key tone sound become mute. 1. Press Soft key 1 M e n u + 4 ( S o u n d ) + 5 ( K e y V o l u m e ) in on-hook state. 2. Select the desired volume level by using the navigation key and press O K . 2.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지35 4. Menu Tree 4.5.2 Wallpaper You can personalize your phone’s display by selection of various display settings like Language, Wallpaper, Menu Style, Backlight and Contrast. It allows you to customize the LCD screen display in the standby mode / idle state. If you press Soft Key1, Menu is activated ●●●●●● Dial/Flash Soft Key 1 ●●●●●● Soft Key 2 To scroll in Menu, press ᵋ, ᵍ ,ᵾ or ᶀ button.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지36 4. Menu Tree Menu Tree In the “clock 2” idle screen option, banner will not displayed. 4.5.3 Menu Style Allows you to select the Menu style. 1. Press Soft key 1 M e n u + 5 ( D i s p l a y ) 3 ( M e n u S t y l e ) in on-hook state +3 2. Select 1 ( L i s t ) or 2 ( I c o n ) and press O K . 4.5.4 Backlight Allows you to choose the settings of the LCD and keypad backlight. 1.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지37 4. Menu Tree 4.6.1 Add to My Menu To add to My Menu 1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) + 1 ( A d d t o M y M e n u ) in on-hook state. 2 ( C a l l ) + 1 ( C a l l F o r w a r d ) in on-hook state. 2. Select from Immediate / When Busy / No Reply / Not Reachable / Disable All. “Disable All” deactivates all the activated call forwarding options. 3. Select E n a b l e or D i s a b l e and press O K . 1) Search desired item in Add to My Menu.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지38 4. Menu Tree Menu Tree * Contact your service provider for more information on Call Forward and VMS Forward. Voice Mail Access Number When you want to access your Voice mail, you are required dialing Voice Mail Access Number. 1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) + 2( C a l l ) + 3( Voice Mail Access Number ) in on-hook state. Call Timer While a call is in progress, you can see the elapsed time of the active call if you set Call Timer to be Enable.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지39 4. Menu Tree 3 ( P h o n e ) + 1 ( A u t o D i a l T i m e O u t ) in 3( P h o n e ) + 2( P h o n e I n f o ) + 2 ( V e r s i o n ) in on-hook state. on-hook state. 2. Select desired time and press O K . You may select one of the seven options (Off / 2 Secs / 3 Secs / 4 Secs / 5 Secs / 7 Secs / 10 Secs ) Phone Info 4.6.4 Security Menu Tree 1. Press Soft key 1 M e n u + 6 ( S e t t i n g s ) + 1.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지40 4. Menu Tree Menu Tree P o w e r O n : means that the phone is always locked whenever it is turned on although you have unlocked before. L o c k N o w : means that the phone is locked immediately. (In idle state press “Key 0” for a long time, The phone is locked immediatly.) N o t e : To unlock the phone, press Unlock button (soft key2) Enter 4-digit lock code (Default “0000”) Emergency Numbers Emergency Number can store upto three Numbers. 1.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지41 4. Menu Tree Number and Time, HotLine functions as follows: 3. If O n is selected, When you pick up the handset or press button , the phone automatically dials the HotLine Number that you have already saved if any number is not dialed for duration specified in HotLine Time. ⍥ Enter the numbers / starting digit of specific numbers to be restricted in the Restrict list. ⍥ Enter the number / starting digits of the numbers to be allowed in the Permit list. 4.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지42 4. Menu Tree Menu Tree in on-hook state. To return to the initial screen, press E N D button. 2. Enter lock code. And to return to the previous screen, press C l e a r button. 3. To Clear Memory and Erase all data, select Yes . Reset Phone 4.7.1 Scheduler Return to factory setting. But User data is not erased. Scheduler keep your agenda convenient and easy to access.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지43 4. Menu Tree Select from Options: Ring / Erase Past Day 4.7.2 Alarm Allows user to set alarm time. You can save 3 Alarms and set the alarm for a period and specified time. 1. Press Soft key 1 M e n u + 7 ( O r g a n i s e r ) + 2 ( A l a r m ) in on-hook state. In case of already stored alarm, you may see stored alarm and select from Options. (Add / Edit / Erase) In the absence of alarm, “There is no data” message is displayed. 2.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지44 4. Menu Tree 4.7.5 World Clock Menu Tree It is useful when you need to make a call to another country, and you are not sure about the time difference. 1. Press Soft key 1 M e n u + 7 ( O r g a n i s e r ) + 5 ( W o r l d C l o c k ) in on-hook state. 2. Select the city by pressing navigation button. 4.7.6 Stopwatch 1. Press Soft key 1 M e n u + 7 ( O r g a n i s e r ) + 6 ( S t o p w a t c h ) in on-hook state. 2. Select S t a r t . Lap: Saves the lap time.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지45 5. Speaker Phone Speaker Phone This function is a convenient feature, which enables you to make a call using the Speaker Phone ( ) button in on-hook state.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지46 6. Troubleshooting Please check the following items before contacting service center. Troubleshooting Item Phone doesn’t operate at all. Remedy • Check that the phone is installed correctly. • Check that the battery is fully charged. • Check that the power is on. Because of noise and cross talking, call status is bad. Keep away from electrical application such as TV, When I press button to call, can’t hear the dial tone.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지47 7. General Information Item Tx Frequency Rx Frequency Channel Bandwidth Tx Power Rx Sensitivity Size (mm) Weight (gms) Operating Temperature LSP-430G Digital: 824 ~ 849 MHz Digital: 869 ~ 894 MHz 1.25 MHz Digital: LOWER: 200mW ~ UPPER:1.0W -104dBm below (at FER=0.5%) 205X 161X 76 (L X W X H) 554gram -10 ~ 50。C General Information 7.1 Main Unit 7.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지48 7. General Information General Information 48 7.3 Battery Item Capacity Talk time / Standby time Charging time duration Description 3.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지49 LG-Nortel CDMA Fixed Wireless Phone LSP-430G LG-Nortel CDMA Fixed Wireless Phone LSP-430G Licensed by QUALCOMM Incorporated under one or more of the following Patents: U.S, Patent No. 4,901,307 U.S, Patent No. 5,056,109 U.S, Patent No. 5,099,204 U.S, Patent No. 5,101,501 U.S, Patent No. 5,103,459 U.S, Patent No.
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지50 P/N : MMBB9226801 MAR/2009/ISSUE 1.
