User's Manual

3. Basic Operations
Basic Operations
16
3.4 Volume Control
1. Press button of navigation while in
a call, to adjust Earpiece volume.
3.5 Receiving a Call
When the bell rings or backlight blinks in Light mode,
you can receive a call as follows
1. Pick up the handset or press the button.
2. Start a conversation.
3. To disconnect the call, replace the handset or
press the button.
3.6 Lock Mode
Protects your phone from unauthorized use. Once the
phone is locked, it is in restricted mode, until the lock
code is entered. This will allow you to receive phone
calls and still make only emergency calls. The lock
code/password on your phone is “0000” by default. If
you need to modify the lock code, you may modify it
using the new lock code within the security set Menu.
* Also, you can lock your phone manually and change
your default password as explained [4.6.4 page
no.40]
UUnnddeerr LLoocckk MMooddee
1. Press ‘0’ button for some time.
The phone is now locked.
2. To unlock, press Unlock button(Soft Key 2).
Soft Key 1 Soft Key 2
3. Enter unlock code. (Default “0000”)
3.7 Entering and Editing
Information
You can edit the phonebook, Short Messages,
Scheduler and Banner using various text input mode.
●●●●●●
Dial/Flash
●●●●●●
UUpp//DDoowwnn
LSP-430G EN_090303 2009.3.3 11:12 AM 페이지16