User Manual

Wireless SOHO
Installation and Operation Manual
23
FUNCTIONAL
CLASSIFICATION
BUTTON NAME BUTTON DESCRIPTION
Menu Main Menu
MSG Retrieve Messages
Navigation button Up/down/right/left/ok
Function Keys DND
Blocks incoming calls ringing. This applies to outside calls,
intercom calls and transfers
Headset Connecting an optional headset to the station allows
hands-free conversations by pressing [Headset] button.
An industry standard headset can be connected to a station
Vol. up
To turn Handset or Speaker volume up during a call/off hook.
Ringer volume is turned up if phone is ringing. LCD contrast is
turned up if phone is in idle state.
Vol. down
To turn Handset or Speaker volume down during a call/off
hook. Ringer volume is turned down if phone is ringing. LCD
contrast is turned down if phone is in idle state.
Trans An intercom call or a line call can be transferred to another
station or line during a conversation.
Hold When on a call, the station user can place an active call on
hold; the held party will hear a hold tone.
Mute
During a conversation, pressing the [MUTE] button will
disable the handset microphone or the speakerphone whilst
continuing to listen to the other party. Pressing the [MUTE]
button again, will reactivate the microphone. This button is
active on all calls.
Speaker
Pushing the [Speaker] button allows the User to make or
continue a call using the Speaker for two-way communication.
Pressing the [Speaker] button again, will deactivate the
Speaker, and send call transmission to the handset (if in use)
or terminate the call.
Dial Pad 0~9, *, # Use to dial a number, select a menu item, or input values.
2.8.3 GDC-400H/450H Wireless Handset
Button Function
[TALK]
 To make a call
Î Redial number saved in handset.
[END/POWER]
 END/POWER]
 To end a call
 Press for less than 1 second : Power Off
 Press for less than 1 second :Leave a call back or a message
 Press for less than 1 second: Ignore an incoming call.
[LEFT SOFT / RIGHT SOFT]
Access to the current functions by pressing the soft button directly below this
symbol.
Wireless SOHO
Installation and Operation Manual
24
Button Function
[RECALL/CLEAR]
 Talk Mode : Register recall
 Recall a call and retry next call
 When using pre-dial :
Î Press for longer than 1 second : All digits are cleared
Î Press for less than 1 second : 1 digit backspace
Î When using local functional operation : Function cancel
(It should be pressed for longer than 1 second)
[SPEED/PROGRAM]
 Post-Dial :
Î Press for less than 1 second: System speed dial(SPEED).
Î Press for longer than 1 second: Start/Finish a system program
(PROGRAM).
[LEFT]
 In an idle state : To view missed call
In MENU : LEFT
[RIGHT/INTERNAL/TRANSFER/HOLD]
 Talking Mode :
Î Press for less than than 1 second: Transfer a call to another
station(TRANS).
Î Press for longer than 1 second: Hold a call / release a holding call(HOLD).
 In an idle state :
Î In MENU : right button
Î To make a intercom call or a line call
[CALL BACK]
 Press less than 1 second : Leave a call back or a message
G
[UP/DOWN]
 Talk Mode : Up / Down the level of Rx volume, Call by name, CLIP
 Standby Mode :
Î In Menu: Navigate and select among function items in a menu or submenu.
 No inputted state :
Î UP : Local Redial
Î DOWN : Phonebook list
 To lock Keypad (Press for longer than 1 second)
 ‘#’ Display (Press less than 1 second)
 While Dialing: To insert pause (Press for longer than 1 second)
G
 Talk Mode : Camp-On
 Standby Mode :
Î ‘*’ is displayed (Press for shorter than 1 second)
Î Enable/disable manner mode(Press for less than 1 second)
0~9
- Standard dial button