User Manual

Wireless SOHO
Installation and Operation Manual
31
2.13 System Capacities
The LWS system is presently available in one configuration as shown in the Table 2.13.1.
Table 2.13.1 LWS System Capacity Chart
DESCRIPTION CAPACITY Remark
Stations LWS-BS station 1
Wireless Terminal 7
6 (Simultaneously)
FAX/SLT 1
Line 3
USB Host Port 1
System Speed Dial 800 (200-999) LWS-BS
Voice Mail Box 240 minutes Max. 3 Channel
Allow/deny list 50/50
Black call list 20
System Received /Dialed call log 15/15 LWS-BS
System Missed call log 900 pool LWS-BS
Table 2.13.2 Wireless Terminal Capacity
DESCRIPTION CAPACITY Remark
Phone book 60
Phone Dialed call log 10
Phone Received + missed call log 50
Wireless SOHO
Installation and Operation Manual
32
3
3
O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
I
I
N
N
S
S
T
T
R
R
U
U
C
C
T
T
I
I
O
O
N
N
S
S
3.1 Call Forward
Description
Users may have selected incoming calls re-routed to other stations or voice mail.
Forward feature is applied to internal calls, auto answering line calls, & normal line calls with ring assigned
only to one station.
Operation
To activate Call Forward:
LWS-BS station
1. Press the [Forward] soft button.
2. Select forward type.(“Uncondition”, “Busy”, “No Answer”, “Busy/No Ans”)
3. Select station number or VM.
4. Press [Save] soft button.
Wireless Terminal
1. Press [Talk] key in GDC-400H/450H or [Speaker] button in LWS-WK.
2. Dial {Call Forward} code (ex. 554).
3. Dial forward type (1:Unconditional, 2:Busy, 3:No Answer, 4:Busy/No Answer)
4. Dial station number or {VSF/VM access} code
To deactivate Call forward:
LWS-BS station
1. Press the [Forward] soft button in forward state.
2. Select “OFF” in forward type.
3. Press [Save] soft button.
Wireless Terminal
1. Press [Talk] key in GDC-4XX or [Speaker] button in LWS-WK.
2. Dial Call Forward code (ex. 554).
3. Dial ‘#’ to cancel Call Forward.
Conditions
1. A station receiving a forwarded call can transfer the call to the forwarding station.
2. Calls cannot be forwarded to a station in DND; if attempted, an error tone is returned.
3. Call Forward status is maintained in the system’s non-volatile memory for protection from power
outage.
4. Forward feature isn’t applied to SLT/Fax port.
5. A station can’t forward to DND station.
6. If a line isn’t auto an answering type and has 2 or more ring assigned stations, the call from the line
isn’t forwarded to the forwarded destination of ring assigned stations.
7. If the line has one ring assigned station, the call from the line can forward to forwarded destination
of the ring assigned station.
8. A station in DND can’t forward.