User's Manual

12
12
Nortel Networks. All Rights Reserved
S L 1 6 & T L 1 6
13
Nortel Networks. All Rights Reserved
S L 1 6 & T L 1 6
NS 161XX Front LED and Descriptions
NS 161XX with lables
Number LED Color Status Description
AT Green On Is lit when link is active
AL Red On Is lit when alarm occurs
FL Green On
Is lit when optical link is connected to
service provider through SL16 / TL16
system
FA Yellow On
Is lit and blink when the device sends/
receives data to/from equipment of the
service provider through SL16 / TL16
system
TL Orange On Is lit when Ethernet link is connected
TA Green On
Is lit and blink when the device sends/
receives data to/from equipment of the
service provider.
SL Green On
Is lit when SFP optical link is connected
(NS 16 1G NN only)
SA Yellow On
Is lit and blink when the device sends/
receives data to/from equipment that is
connected by SFP (NS 16 1G NN only)
Item Specication
Dimensions in mm 125(w) x 215(d) x 40(h)
Power DC 5V, 3A
Ambient Temperature 0 to 50
Humidity 20% to 80%
Technical standards
EN 300 386
(Class B, other then Telecom Centres)
FCC part 15 (CFR 47) (Class B)
EN 55022 (Class B) / 55024
Data rate
100Mbps (NS 16100 NN)
1Gbps (NS 161G NN)
Connectors SC/APC (optical), RJ45 (Ethernet)
LED indicators
Link status, Alarm, optical port status,
Ethernet port status
NS 161XX Front Panel Port Descriptions
Number Port Type Description
Optical port SC/APC Adaptor
This port (optical) should be accessed only by
the service provider. It is the access point to
the service provider’s network.
Ethernet port RJ-45
This port is Ethernet port that will
connect to user devices supporting 10/100
Mbps by NS 16100 NN and 10/100/1000
Mbps by NS 16 1G NN
SFP port SFP connector
This port to be connected other Ethernet
equipments by SFP optical module
(NS 16 1G NN only)
Specications of NS 161XX