User's Manual

S L 1 6 & T L 1 6

STEP 1: Unfasten the grounding screw on the rear side of the NS 161XX.

STEP 2: Attach the 1-hole lug using the screw that was removed in STEP 1.

The grounding connection is suitable for terminating a #18 AWG wire.

Grounding

Connecting optical cable

Check that the power switch on the NS 161XX is in the off position. Insert the SC

APC connector into the optical port of the NS 161XX. Insert the other end of the

APC optical cable into the optical outlet on your wall.

Connecting Ethernet cable

Connect Ethernet cables to the RJ45 Ethernet port in NS 161XX.

Connect the other side of the Ethernet cable to the Ethernet port of your home

device.

Grounding screw

Connecting power cable

Lift up the cable retaining clip and connect the AC power cable.

Pull down the cable retaining clip to lock in the power cable.

The AC power cable must comply with “IEC60320 C14”

Cable retaining clip Power connection

to power adaptor

Optical cable

Connector

SC APC

CAUTION

Only SC APC connector should be used. Other connector types will

not work properly.