User's Manual

TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
This section provides solutions to common issues that may occur during the installation and
operation of the Wireless PCI-1020 Adapter. If you are unable to find an answer here, check
the LG-Ericsson USA website at http://www.lgericssonus.com
1. THE WIRELESS PCI-1020 DOES NOT WORK PROPERLY?
• Reinsert the wireless PCI-1020 into your PC’s PCI slot.
• Right-click on My Computer and select Properties. Select the Device Manager
and click on Network Adapter. You will find the LG-Ericsson PCI-1020 if it is
installed successfully. If you see the yellow exclamation mark, the resources are
conflicting. You will see the status of the PCI Adapter. If there is a yellow
question mark, please check the following:
• Make sure that your PC has a free IRQ (Interrupt Request, a hardware interrupt
on a PC)
• Make sure that you have inserted the right adapter and installed the proper
driver.
• If the Wireless PCI-1020 adapter does not function after attempting the above
steps, remove the adapter and do the following:
• Uninstall the driver software from your PC.
• Restart your PC and repeat the hardware and software installation as specified in
the User Guide.
2. I CANNOT COMMUNICATE WITH THE OTHER COMPUTERS
LINKED VIA ETHERNET IN THE INFRASTRUCTURE CONFIGURATION?
• Make sure that the PC and the wireless router/access point to which the adapter
is associated is powered on.
• Make sure the LG-Ericsson PCI-1020 adapter is configured on the same channel
and with the same security options as with the other computers in the
infrastructure configuration.