User's Manual Part 1

RBS 2109 User’s Guide
Danger!
This product contains Beryllium Oxide (BeO), which can cause injury to skin or
mucous membranes severe enough to endanger life or cause permanent injury.
BeO dust is created by chafing, filing, or breakage and is extremely dangerous
if inhaled, even for only a few seconds. Particles penetrating the skin through
wounds or abrasions are liable to cause chronic ulcerations. Do not handle
components containing BeO without protection.
Symptoms of BeO Poisoning
Symptoms of BeO poisoning are respiratory distress, cyanosis (grey-blue
discoloration of the skin and mucous membranes), or both. These symptoms
may develop within a week, or after a period of several years.
Safety Precautions for Working with Components Containing BeO
The following precautions must be observed when working with components
containing BeO:
• Do not carry loose components in pockets, bags, or containers, or tamper
with them in any way that could cause breakage or disintegration.
• Do not apply excessive heat
during soldering.
• Do not break open components for inspection.
• Store components in their original packaging and do not mix them with
other components.
• Ensure that components do not become mechanically damaged.
• Use care when replacing defective components.
• Do not blow on exposed surfaces due to the danger of BeO dust.
• In case of accident, or if you feel unwell, seek medical advice immediately
and show the label where possible.
2.11.2 Battery Acid Hazard
This section provides information on chemical hazards related to lead-acid
batteries.
2
0
E
N/LZT 720 0090 Uen R1A 2004-09-17