User's Manual Part 1
Table Of Contents
- RBS 2109 User's Guide
- 1 Introduction
- 2 Personal Health and Safety Information
- 3 System Safety Information
- 4 Tools and Instruments
- 5 Installation of RBS
RBS 2109 User’s Guide
4 Tools and Instruments
This section contains lists of all tools and instruments recommended for the
complete installation of the RBS 2109.
4.1 Tools for Installation of RBS 2109
Table 2 Basic Tools for Installation
Description
Specification
Adjustable spanner 10"
-
Drilling machine
-
Knife
(1)
-
Measuring tape
(1)
6 m
Pen
-
Screwdrivers
(1)
Torx: T20 and T30
Screwdrivers 3 mm and 5.5 mm
Side cutting pliers
(1)
-
Snip nose pliers
-
Socket set
(1)
10 – 19 mm
Spirit level
(1)
-
Torque wrench 5 – 25 Nm
U wrenches
(1)
13 mm, 16 mm, 17 mm, 20 mm and
22 mm
Wire stripper
(1)
0.2 – 6 mm
2
(1) Included in Personal Tool Set, Product Number LTT 601 135/1.
Table 3 Special Tools for Installation
Description
Specification
Product Number
Crimping tool set for grounding LTT 601 86
Torque wrench for N connector LSS 103 25/1
Torque wrench for TNC connector LTT 601 93
4.1.1 Documentation
The following documents are required for the installation procedure:
33EN/LZT 720 0090 Uen R1A 2004-09-17