User's Manual Part 1

RBS 2109 User’s Guide
1
Remove the cover. Remove the
existing flash card by pulling up
the adjacent black plastic lever
and then pushing it down to eject
the card.
P010366A
2
Insert the new flash card, push
it in, and reset the release lever
(ensuring that the card is in
position).
P010157A
Flash
Card
3
Put back the cover.
5.4.6 Installing the IXU (Master RBS Only)
This section describes how to install the Interface and Switching Unit (IXU)
on the MBU.
Note: This section is valid only for the master RBS. IXU is not used in
extension RBSs.
5
4
E
N/LZT 720 0090 Uen R1A 2004-09-17