User's Manual Part 2

RBS 2109 User’s Guide
P009531B
MODE
2
3
4
5
6
7
8
9
0
FREQ/DIST
AMPLITUDE
SWEEP
Site Master
Mode
External Power
Serial Interface
Battery Charging
12.5-15V DC
RF Out/Reflection 50W
Back Lighting
Contrast
Escape/Clear
Frequency/
Distance
Amplitude
Sweep
Soft Keys
Up/Down arrow
On/Off
Print
Save display
Limit
Save setup
Recall display
Run/hold
Recall setup
Marker
Enter
System Menu
Auto scale
Start cal
Figure 30 Anritsu Site Master S331C
The keys mentioned in the instructions in this chapter are shown in the
figure
above. In the instructions a ‘‘key’’ is marked with the text describin
g its function,
while a ‘‘soft key’’ has its text displayed on the screen (next to t
he key).
For more detailed information on the Antritsu Site Master, see:
Anritsu Site Master User’s Guide
Preconditions
Before starting the tests, ensure the following:
• For the DTF Tests, that the installation of feeder cables with jumpers is
complete prior to testing
• For the SWR Test, that the connection of antennas, feeder cables with
jumpers and, if applicable, ddTMA is complete prior to testing. Ericsson
recommends that the connectors are not covered with sealing tape until all
testing is complete.
• A test record for recording the test results is available
7
4
E
N/LZT 720 0090 Uen R1A 2004-09-17