User's Manual Part 2

RBS 2109 User’s Guide
6.10.3 Filling in the Checklist
The following checklist is not mandatory but is strongly recommended. Local
procedures and safety regulations must be evaluated and included in this
checklist.
Table 19 Checklist
Check the following: OK
1.
That all outdoor antenna system connectors are covered with
sealing tape.
2.
That the test record is filled in.
3.
That the Site Installation Documentation is completed with the
test record and the test record supplements.
6.11 SWR ↔ Return Loss Conversion Table
This section provides the corresponding Standing Wave Ratio (SWR)
measurements for a range of Return Loss values, if needed.
9
8
E
N/LZT 720 0090 Uen R1A 2004-09-17