User's Manual Part 2

RBS 2109 User’s Guide
Note: If an Omni Antenna is to be installed on the RRU, the RRU earthing
cable must be connected after the omni antenna bracket has been
mounted.
5.4.9 Installing the Fan Unit (Optional)
This section describes how to install the fan unit.
1
Install the fan on top of the RRU
and fasten the three screws.
P010496A
2
Connect the power cable to the
RRU.
P010543A
5.4.10 Installing RXBP (Optional)
This section describes how to install the Receiver Band Pass filter (RXBP) on
the RRU and how to connect the cables.
65EN/LZT 720 0090 Uen R1A 2004-09-17