User's Manual Part 2

RBS 2109 User’s Guide
P010223A
Figure 55 Defining Transmission Parameters
2. Set the parameters according to the table and instructions below.
3. Click OK when all parameters are set.
Table 35 PCM Parameter Settings for Transmission Interface T1, Short Haul
PCM Parameter Setting
Sync Source See Site Installation Documentation
Transmission Interface DS1(T1)
Network Topology See Site Installation Documentation
LBO A
LBO B
LBO C
LBO D
See instructions below
FDL Use See Site Installation Documentation
The instructions below describe how to calculate the LBO parameters.
Note: Ports C and D can also be used as a multidrop pair.
121EN/LZT 720 0090 Uen R1A 2004-09-17