User's Manual Part 2

RBS 2109 User’s Guide
5.4.12 Installing the Integral Sector Antenna (If Applicable)
This section describes how to install a Sector Antenna on the RRU.
1. Attach the Sector Antenna on the front of the RRU. Secure it with four
screws.
P011293A
Figure 29 Installing the Sector Antenna
5.4.13 Connecting RBS Antenna Cables
This section describes how to connect antenna cables when a MCB or integral
antenna is not used.
1
Connect the RBS jumpers to connection port TX(/RX) 1 and TX(/RX) 2,
and tighten with the appropriate torque wrench. See Table 9 on page
41.
P010579B
6
8
E
N/LZT 720 0090 Uen R1A 2004-09-17