Reference Manual

RBS 2206 Radio Base Station
EN/LZT 720 0225 R3A 9 (24)
P009694A
Diameter
Height
Antenna
Distance
behind
antenna
Figure 4 Compliance boundary cylinder
Note: Table 4 shows an example for a typical antenna. As the antenna field
distributions will differ for different configurations and environments,
complete calculations or measurements may be necessary in order to
establish the compliance boundary for other configurations chosen by
the customer. For further information on calculation methods, see:
Radio Site Installation Engineering
Manual
EN/LZT 720 0069
Table 4 Compliance boundary dimensions for the General Public (GP) and
Occupational (O) exposure for typical configurations. Tilt: 0°.
Compliance distances (m)
(1)
Diameter of
cylinder
Height of
cylinder
Distance
behind
antenna
Frequency
(MHz)
Configuration GP O GP O GP O
900 G:1x2, G:1x4 5 2 1.6 1.3 0.1 0.05
900 F:1x12 9 4 2.0 1.5 0.1 0.05
1800 G:1x2, G:1x4 4 1 1.6 1.6 0.1 0.05
1800 F:1x12 6 2 1.6 1.6 0.1 0.05
(1) The numbers above are valid for these typical configurations and the specified antenna.
Other installation configurations or antennas can result in different compliance distances.
For characteristics of an antenna recommended for typical configurations of
an RBS 2206, see Table 5.