User's Manual Part 1
RBS 2308 and RBS 2309 User’s Guide
• Information about less-temperature-sensitive units with no heater has
been added
Chapter Site Installation Tests
• Section Setting IDB Parameters has been updated with new work process
Chapter PSTU Startup
• This is a new chapter
Chapter Maintenance
• A new section, Returning Hardware, has been added
Chapter Reconfiguring the RBS for IP Transmission
• This is a new chapter
1.6.2 R7A to R7B
Chapter Glossary
• New abbreviations added
1.6.3 R6A to R7A
Chapter Site Installation Tests
• Section Setting IDB Parameters updated with parameter descriptions
Chapter Maintenance
• Section Fault Localization Using OMT updated
1.6.4 R5A to R6A
The appendices EBB-01 Maintenance and Installation Instructions and EBB-06
Maintenance and Installation Instructions have been removed from the manual.
Chapter Installation of RBS
• Note about IDB added in section Replacing the Flash Card (If Applicable)
9
EN
/LZT 720 0027 Uen R8A 2006-06-27