User's Manual Part 1

RBS 2308 and RBS 2309 User’s Guide
Note: If an Omni Antenna is to be installed on the RRU, the RRU earthing
cable must be connected after the Omni antenna bracket has been
mounted.
5.4.10 Installing the Fan Unit (If Applicable)
This section describes how to install the fan unit.
1.
Install the fan on top of the RRU
and fasten the three screws.
P010496A
2. Remove the protection cap on
the power connector on the RRU
and connect the power cable.
P010543A
5.4.11 Installing RX
BP (If Applicable)
This section d
escribes how to install the Receiver Band Pass filter (RXBP) on
the RRU and how
to connect the cables.
6
9
EN
/LZT 720 0027 Uen R8A 2006-06-27