User's Manual Part 1

RBS 2308 and RBS 2309 User’s Guide
1. Install the RXBP on the RRU
and tighten the screws.
P010175A
R
X
B
P
R
X
2
R
X
1
R
XB
P 2
R
XB
P
1
2.
Connect the first cable from
connection port RXBP 1 on
the RXBP to connection port
RXBP 1 on the RRU. Connect
the other cable from connection
port RXBP 2 on the RXBP to
RXBP 2 on the RRU.
P010172A
RXBP 1
RXBP 2
RXBP
RX
2
RX 1
RXBP1
RXBP 2
3.
Connect the RX antenna cables to connection port RX 1 and RX 2 on
the RXBP, and tighten with the appropriate torque wrench. See Table
14 on page 43.
For more information about antenna connections, see:
Site Installation Documentation
5.4.12 Installing the MCB (If Applicable)
This section describes how to install the Multicasting Box (MCB) on the RRU
and how to connect the cables.
70
EN/LZT 720 0027 Uen R8A 2006-06-27