User's Manual Part 1

RBS 2308 and RBS 2309 User’s Guide
5.4.16 Testing the Instal
lation
The RBS is now ready
for the site installation tests.
The site installat
ion tests should be performed directly after the completion of
the RBS installat
ion, see Chapter Site Installation Tests.
After the install
ation and integration testing is completed, return to Section
5.4.17 on page 82.
5.4.17 Installing the S
unshields
This section des
cribes how to install the sunshields.
Different sunsh
ields are used depending on whether or not components are
installed on the
front of the RRU.
1. If the fan unit or
integral Omni Antenna are not used, install the top
sunshield and f
asten two screws either to the RRU or the IXU. See Figure
below.
P010232C
2. If the fan unit is used, install the fan cover on top of the RRU. See Figure
below.
82
EN/LZT 720 0027 Uen R8A 2006-06-27