User's Manual Part 2

RBS 2308 and RBS 2309 User’s Guide
P010226A
Figure 52 Defining Alarm Inlets
3. In the Inlet Usage box, select “External Alarm”.
4. In the Type box, define the alarm type as “Closing” (the alarm is raised
when the alarm loop closes) or “Breaking” (the alarm is raised when the
alarm loop breaks).
5. In the ID box, give the alarm the appropriate ID number.
6. In the Severity box, set the severity level of the alarm.
7. Add a message in the Comment box.
This m essage will be displayed in the BSC/OMT if the alarm is raised.
8. Click Apply after defining the alarm.
9. Repeat steps 2 to 8 to define remaining alarms.
10. Click OK when all alarms are defined.
1
21
EN
/LZT 720 0027 Uen R8A 2006-06-27