User's Manual Part 2

RBS 2308 and RBS 2309 User’s Guide
P010477A
Figure 5
8 Monitoring Cable Attenuation
6. Clic
konStart Monitor and read the value of the cable attenuation. The
disp
layed value is given in deci dB (10 deci dB = 1 dB). Make a note of
the v
alue in the test record.
When configuring the IDB for RBS 2 and RBS 3, follow the instructions below.
F
or RBS 2 and R BS 3:
7. Set LBO A (C) on RBS 2 (RBS 3) to “Long h. ALBO, 0 dB”.
8. On the Configuration menu, click Install IDB.
9. On the Maintenance menu, click Monitor.
10. In the Available monitors box, select “Line Attenuation for PCM-A” (C) and
click  to add “PCM” in the Monitors to start box.
136
EN/LZT 720 0027 Uen R8A 2006-06-27