User's Manual Part 2

RBS 2308 and RBS 2309 User’s Guide
P010476A
Figure 59 Reading Fault Status
3. In the Available monitors box, select “MO fault maps” and click  to add
“RBS” into the Monitors to start box.
4. Click Start monitor.
5. In the RBS Event Monitor window, check the MO faults box to see if there
are any faults. If there are, then correct these before continuing.
When an MO fault is selected, corresponding fault description, action, and
related faults are displayed. See also:
Fault List Micro
EN/LZT 720 0466
6. Close the RBS Event Monitor window.
1
41
EN
/LZT 720 0027 Uen R8A 2006-06-27