User's Manual Part 2

RBS 2308 and RBS 2309 User’s Guide
P015679C
PSTU
Figure 63 Local Te
rminal Serial Cable Connection
6.
Press ENTER on the local terminal. The PSTU responds with a
command prompt to confirm that communication is established
between the local terminal and the PSTU.
8.3.2 Resetting the Configuration
This section describes how to reset the PSTU configuration and activate the
default settings.
Note: It is not necessary to reset the PSTU configuration i f the PSTU is
already configured for the site. To read the attribute settings, the
getMoAttributecommand is used.
1.
Reset all settings to default values.
Command: resetAllMoAttributesToDefault
Example: resetAllMoAttributesToDefault
2.
Restart the PSTU to activate the default settings.
Command: restart
Example: restart
1
53
EN
/LZT 720 0027 Uen R8A 2006-06-27