User's Manual Part 2

RBS 2308 and RBS 2309 User’s Guide
4.
Set the subNetMask.
Command: setMoAttribute
Example:
setMoAttribute PST=0 subNetMask 255.255.255.0
5.
Set the defaultGateway.
Command: setMoAttribute
Example:
setMoAttribute PST=0 defaultGa
teway 192.168.59.1
6.
Set the hostName.
Command: setMoAttribute
Example: setMoAttribute PST=0 hostName pstuKista2
7.
Set the wakeUpRegistration IP address.
Command: setMoAttribute
Example:
setMoAttribute PST=0 wakeUpRegistration 192.168.59.62
8.
Set the wakeUpEventInterval.
Command: setMoAttribute
Example: setMoAttribute PST=0 wakeUpEventInterval 10
9.
Change the password for Secure Shell (SSH) login from the OSS. The
new password is required at the next SSH login.
Command: changePWD
Example: changePWD oldPasswd newPasswd newPasswd
10.
Restart the PSTU to activate the new settings.
Command: restart
Example: restart
The PSTU restart takes a few minutes. After restarting, the PSTU temporarily
passes through l ocal mode and then changes to remote mode. The status of
the PSTU indicators is shown in the table below.
1
57
EN
/LZT 720 0027 Uen R8A 2006-06-27