User's Manual Part 2

RBS 2308 and RBS 2309 User’s Guide
Table 57 RRU Indica
tors After Site Integration
RRU Indicator
State
Fault
Off
Operational On
Local
Off
RF off Off
AC power on On
(1)
DC power on On
(1)
RRU temp.
Off
(1) Depending o
n power system configuration.
Table 58 IXU Ind
icators After Site Integration
IXU Indicator
State
Fault
Off
Operational On
Local
Off
RBS fault Off
External alarm
Off
AC power on On
(1)
DC power on On
(1)
IXU t emp.
Off
Transmission OK On
(2)
(1) Depending on power system configuration.
(2) A, B , C and/or D, depending on transmission configuration.
Table 59 PSTU Indicators After Site Integration
PSTU Indi
cator
State
Fault
Off
Operational On
Synchron
ized
On
(1)
10/100Base-T On
(2)
100Base
-LX10
On
(3)
Transmi
ssion OK
Off
(4)
(1) If the PSTU is used as the synchronization source. Otherwise, the indicator is off.
(2) When traffic is active on the electrical Ethernet link.
(3) When traffic is active on the optical Ethernet link.
(4) Ports A–D.
170 EN/LZT 720 0027 Uen R8A 2006-06-27