User's Manual Part 3

RBS 2308 and RBS 2309 User’s Guide
10. Loosen the two securing screws
under the IXU and remove the
unit.
P010365B
11.
Remove the cover for the flash
card. To remove the flash card,
lift up the release lever and then
push it in.
P010366A
12.
Insert the new flash card, reset the lever, then refit the cover.
Note: The flash card should be preloaded with the correct software and IDB.
For instructions, see Chapter Site Installation Tests.
13. Mount the IXU and secure it with the two screws under the IXU.
14.
Connect the Y-link c ables. Ensure that the Y-link cables are connected
to the correct connectors.
15.
Mount the connection frame and connect all cables. C lose the IXU
cover.
16.
Connect the earth cable and the AC/DC cable.
214
EN/LZT 720 0027 Uen R8A 2006-06-27