User's Manual Part 4

RBS 2308 and RBS 2309 User’s Guide
11.3.8 Setting the RBS to Remote Mode
1. Inform the OMC operator that the PSTU configuration can be completed
from the Operations Support System (OSS).
2. Press the Local/Remote button on the IXU to set the RBS to remote mode.
Wait until the RF off indicator on the RRU interface panel goes off and
the O perational indicator comes on.
3. Close the sunshields.
4. Coordinate the RBS integration with the OMC operator. To integrate the
RBS, see chapter RBS Site Integration in the RBS 2308 and RBS 2309
User’s Guide.
2
69
EN
/LZT 720 0027 Uen R8A 2006-06-27