Product Description

Limited Internal
PRODUCT DESCRIPTION 11 ( 27 )
EAB/SEMCON Staffan Paulusson EN/LZT 720 0491 Uen
EAB/RKW Lena Jonsson Borg 2004-12-28 R1A
Prepared (also subject responsible if other) No
Approved Checked Date Rev Reference
E
Table 4 Compliance Boundary Dimensions for the General Public (GP) and
Occupational (O) Exposure for Typical Configurations
Dimensions of Cylindrical Compliance
Boundary in (m)
Diameter Height Distance
Behind
Antenna
Configuration
Frequency
(MHz) GP O GP O GP O
900 6 3 1.7 1.4 0.1 0.1
3x2 no hybrid
1800
5
1 1.6 1.4 0.1 0.05
900 4 1 1.5 1.4 0.1 0.1
3x2 combined
1800 2 0.5 1.4 1.4 0.1 0.05
900 6 3 1.7 1.4 0.1 0.1
3x1 TCC
1800
5
1 1.5 1.4 0.1 0.05
The cylinder shape overestimates the compliance distances to the side of the
antenna. In reality the compliance distances for occupational exposure to
the side, in line with the front of the antenna, is less than 0.15 metres for all
configurations above. For characteristics of an antenna recommended for
typical configurations of RBS 2107,
see Table below.
Table 5 Characteristics for a Typical Antenna (KRE 101 1916/1)
Antenna Specifications
X-pol macro RBS sector antenna
Antenna Height
1.3 m
Horizontal Half-power Beam Width
65 degrees
Vertical Half-power Beam Width
14.5 degrees at 900 MHz
7.8 degrees at 1800 MHz
Antenna Gain
14 dBi at 900 MHz
16.5 dBi at 1800 MHz
Down Tilt
0 degrees
The maximum power fed to the antenna, as a function of the number of carriers
per antenna and the maximum power (including tolerances and transmission
loss) per carrier, for RBS 2107 at 900 MHz and 1800 MHz, are given in table 6.