B2CC011AA B2CC011AA-A Product Manual 2.4 GHz WLAN Access Radio Module 2 Document Date: Document Number: Document Version Number: Document Status: November 2004 PM-B2CC011AA-A 2 Release © Copyright 2004 by BelAir Networks. All rights reserved..
B2CC011AA-A Product Manual – 2.
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module Contents About this Document ............................................................. 3 Introduction ............................................................................. 3 Conditions of Use.................................................................... 3 Module Installation and Service ............................................ 3 Final Product Requirements .................................................. 3 Regulatory Statements..
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module Introduction The B2CC011AA-A (hereafter referred to as “the module”) is a 2.4 GHz radio module compatible with the IEEE 802.11 standard for Wireless LAN operation. It is designed to be interoperable with WLAN products which are based on Direct Sequence Spread Spectrum (DSSS) radio technology. The module contains a complete 802.11b/g radio and Medium Access Control (MAC) protocol engine which allows implementation of an 802.11b/g access point (AP).
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module Conditions of Use General Conditions of Use This manual is intended to supplement training provided by BelAir Networks or authorized parties. The module B2CC011AA-A is only intended for use in BelAir Networks products and is not for sale to the general public as a standalone module. Please read this entire document, including the Regulatory Statements section before attempting to install or operate the module.
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module and in Canada as IC: 4674A-20000002. Please read all regulatory statements at the end of this document before any attempt to install or operate this module. The module is only certified for operation in the United States and Canada. Before attempting to install and operate this module in any other country, contact BelAir Networks for approval.
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module Module Installation and Service Installation into a Product The module shall only be installed by a technician trained by BelAir Networks or its authorized agents. It should only be installed into an approved product (see above) following all manufacturing and service procedures for that product. The module should only be installed into a final product in a manufacturing or service depot site.
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module Final Product Requirements The requirements below apply to any final product in which the B2CC011AAA module is installed. Antenna Usage and Module Transmit Power B2CC011AA-A module shall only be used in conjunction with the following antenna types: • BelAir Networks model: BEL10012, 8.5 dBi directional diversity antenna. • BelAir Networks model: B1BB031AA, 11.5 dBi directional diversity antenna.
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module MFB24006 MAXRAD 6 dBi omnidirectional +26 dBm (module maximum power) MFB24004 MAXRAD 4 dBi omnidirectional +26 dBm (module maximum power) * Module will transmit at reduced power levels at band edges as per factory calibration. Warning: Use of this module in conjunction with any antenna not expressly listed above will void authority to install or operate this equipment.
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module Product Labeling The following permanent label, or one containing equivalent information, must be affixed in a conspicuous location on the exterior of every product containing this module: This device contains the following: FCC ID: RAR20000002 IC: 4674A-20000002 This device complies with Part 15 of the FCC Rules.
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module Regulatory Statements The following regulatory notes apply to the product which contains module B2CC011AA-A. The following sections or equivalent information shall appear in the user-manual of the final product. Regulatory Information and Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product.
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module This device complies with FCC RF radiation exposure limits for an uncontrolled environment. The radiated output power of this Wireless LAN device is below the FCC radio frequency exposure limits. However, this device should still be installed and used in such a manner that the potential for human contact during normal operation is minimized. In order to comply with RF exposure limits established in the ANSI C95.
B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module BelAir Networks U.S. East 11921 Freedom Drive Suite 550 Reston, VA USA 20190 BelAir Networks U.S. West 1902 Wright Place Suite 200 Carlsbad, CA USA 92008 BelAir Networks Inc. 603 March Road Kanata, Ontario Canada K2K 2M5 703-736-8306 760-918-5544 613-254-7070 November 2004 Sales sales@belairnetworks.com Support support@belairnetworks.com General Information Info@belairnetworks.