User's Manual

B2CC011AA-A Product Manual – 2.4 GHz WLAN Radio Module
November 2004 Page 9 of 14
PM-B2CC011AA-A Version 2
MFB24006 MAXRAD 6 dBi
omnidirectional
+26 dBm (module
maximum power)
MFB24004 MAXRAD 4 dBi
omnidirectional
+26 dBm (module
maximum power)
* Module will transmit at reduced power levels at band edges as per factory
calibration.
Warning: Use of this module in conjunction with any antenna not
expressly listed above will void authority to install or operate this equipment.
Warning: Setting of module transmit power above the limits specified in
the above table will exceed FCC or Industry Canada limits and void authority
to install or operate this equipment.
Product Installation
Products which contain B2CC011AA-A shall only be installed by professional
installers trained by BelAir Networks or its authorized agents. In addition to
normal installation procedures and good installation practice, professional
installers are responsible to ensure that:
1. Only an approved antenna (see above) is connected to the module, and,
2. The antenna is mounted in such a manner and in such a location that
access to the antenna by the general population is minimized. Access to
the antenna by the general population should be limited to greater than 25
cm (10 inches) during normal operation.
Adherence to these rules by the professional installer is mandatory. See full
installation procedures for the particular product for details.