User's Manual

WRM Product Manual – 2.6 GHz WCS Band Radio Module
Page 5 of 21
General Conditions of Use
This manual is intended to supplement training provided by BelAir Networks or authorized parties.
The module B2XH068AA-A is only intended for use in BelAir Networks products and is not for
sale to the general public as a stand-alone module. Please read this entire document, including the
Regulatory Statements section before attempting to install or operate the module.
Warning: Any use of B2XH068AA-A in any manner which is not expressly specified within
this manual or specifically approved by BelAir Networks or its authorized agents will void the user’s
right to operate this module, and is expressly forbidden by BelAir Networks. This includes any
modification of the module, installation of the module in a configuration or used with an antenna
which is not expressly listed in this document or approved by BelAir Networks.
Installation into a Product
The module shall only be installed by a technician trained by BelAir Networks or its authorized
agents. It should only be installed into an approved product following all manufacturing and service
procedures for that product. Refer to the following sections outlining specific installation in BelAir
Networks products.
Module Service
The module is not intended as a field-serviceable unit. It contains no field-replaceable or field-
serviceable parts, or any external adjustable mechanisms. The module should only be serviced in a
manufacturing or service depot site approved by BelAir Networks or its authorized agents.
Country of Use
B2XH068AA-A is certified for use as an Intentional Radiator in the United States as device: FCC
ID: RAR20007001. Please read all regulatory statements at the end of this document before any
attempt to install or operate this module.
The module is only certified for operation in the United States. Before attempting to install and
operate this module in any other country, contact BelAir Networks for approval.