User's Manual

WRM Product Manual – 2.6 GHz WCS Band Radio Module
Page 6 of 21
Overview of B2XH068AA-A module installation into
BelAir Networks products
List of Approved Final Products
The B2XH068AA-A module is only approved for
use in the following BelAir Networks products:
• BelAir200. See BelAir200 documentation
for complete manufacturing instructions.
• BelAir100. See BelAir documentation for
complete manufacturing instructions.
Operation of the module within the products
expressly listed above is required to ensure
compliance to all FCC regulations. Any
modification of the module, or its use in any
configuration not expressly listed above may
void the user’s right to operate this module.
The radio module is part of a multi radio system
in which the B2XH068AA-A is used for
Backhaul applications, for example backhauling
cellular signals. The concept is as shown in
figure 1.
A typical block diagram of a two radio
configuration using one module
( B2XH068AA-A) incorporated into a BelAir
Networks product is shown in figure 2. BelAir
Networks products incorporate other functional
blocks as shown, such as Line and Power
interface, battery back up and power
conditioning as well as an Access Radio.
Fig. 1
Cellular backhaul using the B2XH068AA-A
(RAR20007001 ) radio module in BelAir Networks
products.
Fig. 2
Block diagram of a two radio configuration with the
backhaul module ( B2XH068AA-A) incorporated into a
BelAir Networks product is shown.
Fig.2