User's Manual

B2CH113AA-A Product Manual
DRU 5 GHz WLAN Radio Module
Page 8 of 11
Product Installation
Products which contain B2CH113AA-A shall only be installed by professional
installers trained by BelAir Networks or its authorized agents. This product is to be
installed on fixed permanent structures. In addition to normal installation
procedures and good installation practice, professional installers are responsible to
ensure that:
1. Only an approved antenna (see above) is connected to the module, and,
2. The antenna is mounted in such a manner and in such a location that access to
the antenna by the general population is minimized. Access to the antenna by
the general population should be limited to more than the minimum safety
distance. This distances are outlined according to product type and whether
high gain antennas are used:
DRU2.4GHzradio DRU5GHzradio DRU2.4GHzradio DRU5GHzrad io
≤8dBi ≤15dBi >8dBi ≤15dBi
MinimumSafetyDistances
HighGainAntennas(u pto18dBi)
MinimumDistance
16.5inches
StandardGainAntennas(upto15dBi)
MinimumDistance
8.1inches
Adherence to these rules by the professional installer is mandatory. See full
installation procedures for the particular product for details.
Product Labeling
The following permanent label, or one containing equivalent information, must be
affixed in a conspicuous location on the exterior of every product containing this
module:
FCC ID: RAR30005001
IC: 4674A-30005001