User's Manual

BelAirOS User Guide Troubleshooting Wireless Client Connections
April 22, 2012 Confidential Page 269 of 362
Document Number BDTM00000-A02 Draft
Normal Client Events <b> Starting authentication (open/shared key)
The client has sent an authentication packet to start the authentication process.
The log indicates whether the authentication was
open or shared key .
<?> “ENCRYPTION_TYPE” association complete
The client has completed its association. The encryption type is one of open ,
wep , dot1x , wpa , wpapsk , wpa2 or wpa2psk .
The following success or failure codes apply to this log:
•
<g> when the encryption type is open or wep
• none for all other encryption types
For open and wep , the log message indicates the client is authorized to carry
packets.
For all other encryption types, the log message indicates that clients are now
EAP-authorized (that is, able to send EAP packets) and EAP processing begins.
Offer The server sent a DHCP offer packet to the client.
Request The client sent a DHCP request packet .
Decline The server declined the requested IP from the client.
Ack The server acknowledges the IP requested by the client.
Nack The server sends a negative acknowledgement for the IP
requested by the client.
Release The server releases the client of its IP.
Inform The client sends a DHCP inform packet.
Arp_response An ARP response packet from the client was captured. The
IP in this packet is the client’s IP.
Static A static IP was detected.
Table 19: DHCP State Descriptions (Continued)
DHCP State Description