User's Manual

BelAir20E-11 Conformity and Regulatory Statements Conformity and Regulatory Statements
November 15, 2012 Confidential Page 8 of 12
Document Number BDTD02202-A03 Released
transmission equipment operating in the 2,4 GHz ISM band and using spread
spectrum modulation techniques; Harmonized EN covering essential
requirements under article 3.2 of the R&TTE Directive .
• UK Interface Requirement 2005 UK Radio Interface Requirement for
Wideband Transmission Systems operating in the 2.4 GHz ISM Band and
Using Wide Band Modulation Techniques (November 2006).
• UK Interface Requirement 2006 Wireless Access Systems (WAS) including
RLANs operating in the 5150-5725 MHz band (Version 3.0)
98/34/EC Notification number: 2006/421/UK
Published 14 November 2006
• UK Interface Requirement 2007 Fixed Broadband Services operating in the
5725 -5850 MHz band (Version 3.0)
98/34/EC Notification Number: 2006/422/UK
Published 30 May 2007
The BelAir20E-11 complies with the following EU EMC standards:
• EN 301 489-17 V1.2.1 (2002-08) ElectroMagnetic Compatibility and Radio
Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard
for Radio Equipment and Services; Part 17: Specific Conditions for 2.4 GHz
Wideband Transmission Systems and 5 GHz High Performance RLAN
Equipment
The BelAir20E-11 complies with the following EU Safety standards:
• EN 60825-2:2000 – Safety of Optical Fibre Communication Systems
•
EN 60950:2000 – Safety of Information Technology Equipment
• IEC 60950:2005 Second Edition and/or EN 60950-1:2006
The following CE mark is affixed to the BelAir20E-11:
Note: This equipment is intended to be used in all EU and EFTA countries.
Outdoor use may be restricted to certain frequencies and/or may
require a license for operation – for example in France the frequencies
2454-2483.5 MHz are restricted to 10 mW effective isotropic radiated
power (EIRP) in outdoor environments, so channels 8-13 require
reduced power. For more details, contact Ericsson.