User's Manual

Installing the AP 6321
Caution!
Use ONLY the Ericsson power adapter for the AP 6321. Use of any other
power adapter can damage the unit and voids the Ericsson product warranty.
Figure 2 Power over Ethernet
Warning!
If PoE is used, the AP 6321 must be connected to a power source that complies
with IEEE 802.3at, or to an IEC/EN 60950-1 compliant power limited source.
2.4 Step 4—Check Indicators
All indicators are illuminated for about one to two seconds when the unit is
powered on. After powering on, wait 2 minutes and check that the indicators on
the unit match the indicators in Table 2.
Table 2 Indicator Behavior
Indicator Behavior
(FAULT)
Off
81/006 92-LZA 101 822 Uen D | 2013-11-08