Mobile Phone A1018
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Contents at a Glance Getting Started 3 Preparing Your Phone for Use 5 Turning Your Phone On and Off 11 Display Information and Key Functions 13 Making and Receiving Calls 15 During a Call 17 Functions and Settings 19 Using the Menu System 21 Your Personal Phone Book 25 Using the Call List 29 Your Voice Mail Service 31 Personalizing Your Phone 33 Sending and Receiving Text Messages (SMS) 39 Diverting Incoming Calls 47 Security for Yo
Please note! Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Some of the services in this manual are not supported by all networks. This also applies to the GSM International Emergency Number 112. Please contact your network operator or service provider if you are in doubt whether you can use a particular service or not.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB GETTING STARTED Preparing Your Phone for Use 4 Turning Your Phone On and Off 10 Display Information and Key Functions 12 Making and Receiving Calls 14 During a Call 16
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Preparing Your Phone for Use OVERVIEW Front Antenna Indicator light Earpiece Display Keypad Microphone Back Battery Battery release catch 4 Preparing Your Phone for Use
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB ASSEMBLY You need to do the following to use your phone: • insert the SIM card • attach the battery to the phone • charge the battery THE SIM CARD When you register as a subscriber with a network operator, you get a SIM (Subscriber Identity Module) card. The SIM card contains a computer chip that keeps track of your phone number, the services included in your subscription, and your Phone Book information, among other things.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Removing the SIM Card 1. Remove the battery (if attached). 2. Lift the top of the SIM card and push the card out of the slot. The PIN Most SIM cards are supplied with a security code or PIN (Personal Identity Number), which you need to access the network. Every time you turn on your phone, it prompts you to enter your PIN. You will find your PIN in the information from your operator.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Attaching the Battery to your Phone • Place the battery on the back of the phone and push until you hear a click. When to Charge the Battery The nickel metal hydride battery that comes with your phone can be charged whenever you wish, without affecting its performance. This is not the case with the cheaper nickel cadmium type batteries, often sold as accessories by other suppliers.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Charging the Battery 1. Make sure that the battery is attached to the phone. 2. Connect the charger to the mains. 3. Connect the charger to the phone as shown in the picture. The flash symbol on the phone side plug must face upwards. To indicate charging: • the battery meter in the display pulses continuously, • the indicator on top of the phone shows a steady red light (or green, if the phone is turned on).
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Removing the Battery 1. Turn off the phone. 2. Press the catch on the bottom of the battery. 3. Lift the battery up and away from the phone. Changing the Front Panel 2. 1. 3. 1. Lift the bottom end of the front panel and remove the panel. 2. Fit the top of the new front panel to the phone. 3. Press the panel into place.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Turning Your Phone On and Off TURNING YOUR PHONE ON • Press and hold the N O (ON/OFF) key until you hear a click. Enter PIN Enter PIN **** If Enter PIN Appears in Display Some SIM cards are protected with a PIN code. If Enter PIN appears in the display after you have turned on the phone, do this: 1. Enter your PIN. If you make a mistake while entering your PIN, erase the wrong digit by pressing the C L R key. 2. Press YE S .
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB not the case, the default language is English. To change the display language, see “Personalizing Your Phone” on page 29. If your phone displays a language you do not understand, you can change it to English. 1. 2. 3. 4. To change the display language to English Press the C L R key. Press the L E F T arrow key. Enter 0000. Press the R I G H T arrow key.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Display Information and Key Functions DISPLAY INFORMATION Your phone display will help you to: • verify that you are dialling correctly, • check your signal strength and service availability, • find out if you have received messages, • check which line is in use if you have the Alternate Line Service (ALS), • check the battery level.
Name: Description: Alarm indicator The bell shows that the alarm clock has been set and is active. Line indicator Tells you which line is in use if you have the Alternate Line Service. Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Icon/Indicator: KEY FUNCTIONS The keys have other functions when you access the menu system. See “Using the Menu System” on page 19. Key: Use: YE S To make calls and answer calls. NO To turn the phone on or off. Press and hold the key.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Making and Receiving Calls In this chapter, we assume that you have turned on your phone and that you are within range of a network. If you are abroad, you may use other networks, provided your home network has an agreement that allows you to do this (see also “Setting Network Preferences” on page 55). MAKING A CALL Network 0123456789 1. Enter the area code and phone number. 2. Press YE S .
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB 3. Press YE S . MAKING EMERGENCY CALLS 1. Enter 112 (the international emergency number). 2. Press YE S . The international emergency number 112 can be used in most countries, with or without a SIM card inserted, if a GSM network is within range. Note! Some network operators may require that a SIM card is inserted, and in some cases that the PIN code has been entered, as well.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB During a Call Your phone has several functions which you might find helpful while a call is in progress. CHANGING THE EARPIECE VOLUME To change the earpiece volume during a call • Press the arrow keys (L E F T or R I G H T ). Pressing R I G H T increases the volume. Pressing L E F T decreases the volume. MUTING THE MICROPHONE To turn the microphone off temporarily during a call 1. Press and hold the C L R key.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB SENDING TONE SIGNALS To use telephone banking services or to control an answering machine, you need to use codes. These codes are sent as tone signals (also known as DTMF tones or touch tones). • Press the appropriate keys (0-9, * and #). Tip! You can also save a code together with a phone number in the Phone Book. See “Storing a Number Together with a Name” on page 23.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB FUNCTIONS AND SETTINGS Using the Menu System 19 Your Personal Phone Book 22 Using the Call List 26 Your Voice Mail Service 28 Personalizing Your Phone 29 Sending and Receiving Text Messages (SMS) 34 Diverting Incoming Calls 42 Security for Your Phone and Subscription 44 Handling More than One Call Simultaneously 50 Setting Network Preferences 55 Knowing the Call Time/Call Cost 58 Using Two Phone Lines 60 Calling from Your Car 6
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Using the Menu System You can find all your phone functions in the menu system. You use the menu system every time you want to change a setting in your phone, such as the ring signal. You also use the menus to get the most out of your phone: to set the alarm clock, send text messages, store important phone numbers, etc.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB INTERPRETING THE INSTRUCTIONS IN THE MANUAL Example: • Scroll to Mail, Y E S , Send message, Y E S . < < < Menu Mail > Mail Read messages > Mail Send message > Interpret this instruction as follows: 1. From the standby mode, use the L E F T or R I G H T arrow key to scroll to the Mail menu. The arrows on either side of the word Mail mean that you can scroll to another menu. 2. Press YE S to select the menu.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Network 06:01 < Menu Phone book > < Menu Ring level > < Menu Mail > < Menu Info > < Menu Set alarm > < Menu Divert > < Menu Settings > < Menu Access < Menu Networks > > Using the Menu System 21
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Your Personal Phone Book You can create a personal phone book by storing phone numbers and accompanying names on the SIM card. You use the phone book menu for storing and recalling all the phone numbers in your personal phone book.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB For example • To enter an A, press 2 once. • To enter a B, press 2 twice. • To enter small letters, press *. STORING A NUMBER TOGETHER WITH A NAME Store 12 Name:Jenny +1234567_ 1. Enter the area code and phone number you wish to store. 2. Scroll to Phone book, Y E S , Store, Y E S . The first free memory position is suggested. 3. Enter the name tag that you want to associate with the number. 4. Press YE S to store.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Tip! If you enter a phone number that is too long to fit in the display, this is indicated by an arrow. To see the whole number, press the R I G H T arrow key. Store Used Overwrite? 15 OVERWRITE PROTECTION If you try to store a phone number in a position which already contains a phone number, the message Used Overwrite? appears in the display.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Calling Using the Position 1. Clear the display. 2. Scroll to Phone book, Y E S , Position recall, Y E S . 3. Enter the position number you want to call and press Y E S . Position recall Position: 10 Speed Dialling (memory positions 1–9) 1. Press a position number, 1–9. 2. Press YE S . KEEPING THE PHONE BOOK UP TO DATE Sometimes people change their names, their phone number or even both.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Using the Call List THE CALL LIST This chapter describes the Call List function, which is a type of telephone number log or a memory that stores information (time, date, phone number and name) about the last 30 incoming and outgoing calls. Once your list exceeds 30 calls, the oldest one is deleted. < 26-dec-93 Janina > +234343554 The numbers that you have dialled are always stored.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Calling a Number from the Call List 1. Scroll to Info, Y E S , Call list, Y E S . 2. Scroll to the number that you want to call. 3. Press YE S to make the call. Network Calls:1 Missed Calls If you have missed a call, the phone shows Calls: 1, where the number 1 indicates the number of unanswered/missed calls. • Press YE S to go directly to the Missed Calls list. Erasing a Number from the Call List 1.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Your Voice Mail Service Note! Not all operators have this service. The service also depends on your subscription. Network 11:33 The answering service of your network allows callers to leave a voice message when you cannot answer your calls. When you receive a voice mail, the voice mail icon appears in the display. ENTERING THE NUMBER OF YOUR VOICE MAIL SERVICE 1.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Personalizing Your Phone Your phone includes a number of functions which let you adapt your phone to your own personal needs in different situations. Note that some of the functions allow you to have one setting when the phone is handheld and another when it is connected to handsfree equipment. See “Calling from Your Car” on page 61. CHANGING THE EARPIECE VOLUME You can set the earpiece volume in eight steps.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB RING SIGNAL TYPE You can choose the type of ring signal from a list of different sounds and melodies. You can also compose a melody of your own by entering notes with the keypad (see “Your Own Ring Signal” on page 30). < < < Settings Ring type (Mix) Ring type Mix Ring type Line 1 (Mix) > > > To choose one of the ring signal types 1. Scroll to Settings, Y E S , Ring type, Y E S , Phone, Y E S . 2.
Settings Master reset > To reset the phone 1. Scroll to Settings, Y E S , Master reset, Y E S . 2. Enter the phone lock code (the default is 0000) and press Y E S . Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB < DISPLAY LANGUAGE Most modern SIM cards automatically set the display language to the language of the country where you bought your SIM card. If this is not the case, the default language is English. < Settings Language (Auto) > To change the display language 1.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB To turn the greeting on/off 1. Scroll to Settings, Y E S , Greeting, Y E S . 2. Select On or Off. To revert to the Ericsson logotype • Scroll to Settings, Y E S , Greeting, Y E S , New text, Y E S , C L R , Y E S . AUTO STORE You can choose to let the phone ask if you want to store a called or incoming phone number that is not found in the phone book. The phone then asks Store? when a call to or from a new number is ended.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB MESSAGE SIGNAL You can choose whether to hear clicks, tones or nothing (silent) when you receive a text message (SMS). < Settings Mail alert (Tone) > To set the message signal 1. Scroll to Settings, Y E S , Mail alert, Y E S . 2. Select the sound you wish to hear. TIME The time is always displayed when the phone is in standby mode. < Settings Clock/Date > To set the time format 1.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Sending and Receiving Text Messages (SMS) The Short Message Service (SMS) allows you to send and receive text messages consisting of up to 160 characters. You can receive text messages when the phone is in standby mode, during a call or when incoming calls are diverted to another phone number. If your phone is turned off when a message is sent to you, an envelope icon lets you know you have a message as you turn your phone back on.
To read the message later • Press NO when you see the Read now? prompt. The message is stored in the message memory as New and the envelope icon appears at the bottom of the standby display. Press * to see what time the message was received. Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Network 12:15 READING A STORED MESSAGE 1. Scroll to Mail, Y E S , Read messages, Y E S . 2. Scroll to the message you are looking for. New means an unread message. Old means a read message.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB ERASING A MESSAGE 1. Scroll to the end of the message. The Reply? prompt appears. 2. Press N O . The message Erase? appears. 3. To erase the message from the message memory, press Y E S . The next message automatically appears in the message list. Tip! You can press C L R anywhere within the menu that handles your message to erase it. When Erase? appears, press Y E S .
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Storing a received message in the SIM card memory 1. Scroll to the end of the message. The Reply? prompt appears. 2. Press N O . The Erase? prompt appears. 3. Press N O . The Store? prompt appears. 4. Press YE S . The message automatically moves from the message memory to the SIM card memory. The display now shows the position of the message. For example, if it is the third of the fifteen that the phone can store.
Options Reply Req (Off) > To set the reply requested prompt • Scroll to Mail, Y E S , Options, Y E S , Reply Req, Y E S . Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB < COMPOSING A TEXT MESSAGE For more information on how to enter text, see “Your Personal Phone Book” on page 22. Entering Small Letters • Enter the letter, for example an A, and then press *. An a appears. Small letters will now appear until you press * again.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Note! The same procedure is used with all types of messages, for example e-mail or fax. Check with your network operator to find out which message types you can use. You have to change the message type first. SENDING A STORED MESSAGE 1. Scroll to Mail, Y E S , Send message, Y E S . 2. Scroll to the stored message you wish to send and press Y E S . 3. Now you can edit your stored message.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB which is broadcast to all subscribers in a certain network cell at the same time. For example, the information may be a local road report or a local taxi phone number. Note! This feature may not be available in all networks. Turning Area Information On • Scroll to Mail, Y E S , Options, Y E S , Area info, Y E S , On, Y E S . Turning Area Information Off • Scroll to Mail, Y E S , Options, Y E S , Area info, Y E S , Off, Y E S .
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Inserting an Area Information code 1. Scroll to Mail, Y E S , Options, Y E S , Area info, Y E S , Edit list, Y E S . The number to the left indicates the position in the list. You can scroll forwards and backwards through the list with the arrow keys. 2. To insert a code, scroll to the first empty position, using the arrow keys and press Y E S . 3. Enter the new code.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Diverting Incoming Calls If you want to make certain that your incoming calls are correctly handled when you are unable to answer them, you can use the Call Divert service to divert them to another phone number. Note! The Call Divert service may not be available in all networks. The Call Divert service lets you: • divert calls if you are already on the phone, On busy.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB • Unanswered (includes On busy, No reply and Unreachabl). CHECKING THE DIVERT STATUS < < All calls Get status > Divert Check all > To check the status of a certain call divert 1. Scroll to Divert, Y E S . 2. Select the divert you want. 3. Select Get status. The message Please wait appears, followed by a message which informs you whether the call divert is activated or not.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Security for Your Phone and Subscription There are several ways to protect your phone and subscription from unauthorized use. Anything from a simple keypad lock to full phone number control. KEYPAD LOCK The Keypad Lock helps you to avoid accidental dialling, which can happen if you keep your phone in your pocket. An icon in the shape of a key in the display informs you that the keypad is locked.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Some SIM cards are protected with a PIN (Personal Identity Number) at the time of purchase. If the SIM card lock is activated, you have to enter the PIN every time you turn on your phone. If you enter your PIN incorrectly three times in a row, the SIM card is blocked. This is indicated by the message PIN Blocked Unblock? If this happens you need to unlock it to access your subscription. PIN Blocked Unblock? To unblock your SIM card 1.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB To cancel the SIM Card Lock 1. Scroll to Access, Y E S , Card Lock, Y E S , Unlock card, Y E S . 2. Enter your PIN and press Y E S . The message Unlocked confirms that the card lock is now cancelled. Note! This only works if your SIM card allows you to cancel the card lock. PHONE LOCK The phone lock protects the phone against unauthorized use if it is stolen and the SIM card exchanged. It is not activated when you buy the phone.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB CALL BARRING The Call Barring service allows you to bar different types of outgoing and incoming calls. Note! This service may not be available in all networks or may require a separate subscription. The following calls can be barred: • all outgoing calls, • all outgoing international calls, • all outgoing international calls, except to your home country, • all incoming calls, • all incoming calls when you are abroad (when roaming).
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB 3. Enter the new password and press Y E S . 4. Enter the new password a second time and press Y E S . The message Please wait appears, followed by a message confirming that the password has been changed. FIXED DIALLING Fixed Dialling is a way of restricting outgoing calls. It requires a SIM card that allows fixed numbers to be stored. The fixed numbers are protected by your PIN2.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Storing Fixed Numbers 1. Scroll to Phone book, Y E S , Fixed numbers, Y E S , Store, Y E S . 2. Enter your PIN2 and press Y E S . 3. Enter the name (optional) and the fixed number in the same way as when storing an ordinary phone number. Editing a Stored Fixed Number 1. Scroll to Phone book, Y E S , Fixed numbers, Y E S , Edit, Y E S . 2.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Handling More than One Call Simultaneously Your phone allows you to handle more than one call simultaneously. This means that you can put a call that is in progress on hold, while you make or answer a second call, and then switch between the two calls. You may also set up a Conference Call to have a joint conversation with up to five people.
< Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB RECEIVING A SECOND CALL WHILE A CALL IS IN PROGRESS Answer? > If the Call Waiting service is activated, you will hear a tone in the earpiece if you receive a second call. The question Answer? appears in the display. You can do one of the following: Put the current call on hold and answer the waiting call • Press YE S . The message 1 on hold appears. 1 on hold < Busy? > Continue the current call and reject the waiting call 1.
Connect the two calls (Call Transfer) 1. Press L E F T followed by Y E S to select the Handle calls menu. 2. Scroll to Transfer call? and then press Y E S . The two calls are now connected to each other, and you are disconnected from both calls. Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Handle calls Transfer < call? > Note! The Call Transfer service may not be available in all networks. < Handle calls Join > calls? Join the two calls into a conference call 1.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Adding New Participants to the Conference Group You can put the conference group on hold and then add new participants. Conf held < Handle calls Join > calls? Handle calls < Conference > participants Conf parts <1: > Anderson To add a new participant 1. Press YE S to put the conference group on hold. 2. Call the third person you wish to include in the conference group. 3.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB To make the call 1. To put the conference group on hold, press Y E S . 2. Enter the number you wish to call and press Y E S . Conf held To switch between the new call and the conference group • Press YE S . Handle calls < Release > active? To end the new call and return to the conference group 3. Press L E F T followed by Y E S to select the Handle calls menu. 4. Scroll to Release active? and then press Y E S .
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Setting Network Preferences SEARCHING FOR NETWORKS When you turn on the phone, it searches for the last accessed network. If this is not within range, you may use another network, provided your home network has an agreement that allows you to do so. This is called roaming. The order of preference in which the phone selects a network is determined by a list of preferred networks on your SIM card.
Meaning Forbidden The name of the network is included in a list of forbidden networks on your SIM card. You can normally not select this network. See Forbidden Networks below. Available The name of the network is not included in the preferred or forbidden list on your card. You can select this network, but you might not be able to use it. Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Message Forbidden Networks The names of the forbidden networks are stored on your SIM card.
< Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB 3. Press YE S and scroll with the arrow keys until you find the network that you want. If the desired network does not appear, press Y ES when the question Other? appears. 4. Enter the three-digit country number and the two-digit network number. 5. Press YE S to add the network to the list. Edit list Network 1 Edit list Network New pos: > _ Erasing a Network from the List 1. Scroll to Networks, Y E S , Edit list, Y E S . 2.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Knowing the Call Time/ Call Cost CALL INFORMATION The display shows the duration of a call in progress. When you end the call, the call duration information is shown for another three seconds. If your network and SIM card support this feature, you can have the call cost (or the number of call units) displayed. Settings < Call info > (Time:Outg.) To select the call information you want 1. Scroll to Settings, Y E S , Call info, Y E S .
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB DETERMINING THE CALL COST If you select the Cost option in the Call info function in the Settings menu, the Price function appears in the Info menu. However, to be able to use the Price function, both your network and your SIM card must support it. The Price function lets you enter and vary the price per call unit. The price entered is stored on your SIM card.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Using Two Phone Lines Note! The Alternate Line Service may not be available in all networks and may require a separate subscription. Your phone supports two voice lines (Alternate Line Service, ALS) with different phone numbers, Line 1 and Line 2. This is useful if you want to keep business calls and private calls on separate lines. You can only send and receive text messages (SMS) on Line 1.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Calling from Your Car By using the Ericsson portable or vehicle handsfree solutions, you can be on the phone without using your hands to hold it. HANDSFREE TYPES If you use a Vehicle Handsfree Solution, you can choose between two different ways in which your phone can handle the speech. This is done in the Handsfree sub-menu. Handsfree Type 1 Handsfree Type 1 means that the phone handles the call in semiduplex mode.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB ANSWERING MODE The sub-menu Answering mode includes two functions: Any key and Auto, which are useful when you use the phone with handsfree equipment. • Any key: You can answer an incoming call by pressing any key, except the N O key. • Auto: If you choose the automatic answering mode, an incoming call is answered automatically after one ring signal. Selecting Answering Mode 1. Scroll to Settings, Y E S , Answering mode, Y E S . 2.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Calling Card or Credit Card Calls When making international or long distance calls, you may not want your operator to charge you for these calls on your normal account. If you have a credit card or a calling card, you may want to re-direct the charges to one of those accounts instead. Your phone is all set for making this procedure as easy as possible for you. Note! The Calling card and Credit card call feature is network dependent.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB 2. Enter your security code and press Y E S . To change security codes, see above. 3. Select card position (Card 1 or Card 2). 4. Enter the access number (the phone number) to the calling card server. The numbers are entered in the same way as in the ordinary Phone book. 5. Press L E F T or R I G H T . 6. Enter the verification code to your calling card server. 7. To store the calling card number, press Y E S .
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Sending and Receiving Faxes If you have a SIM card that does not support separate fax and data numbers, you need to activate the data menus. When the Data Menus are activated, a new menu appears in your phone: Next call type. Settings < Data menus > (Off) ACTIVATING THE DATA MENUS • Scroll to Settings, Y E S , Data menus, Y E S , On, Y E S .
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Setting the Alarm ALARM The phone has an alarm function. When it is activated, an icon in the shape of a bell is shown next to the current time in the display. Network 11:33 The alarm sounds at the time set, even if the phone is turned off. The illumination of the keys and the display flashes. The volume of the alarm signal depends on the setting of the ring signal.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB ADDITIONAL INFORMATION Troubleshooting 68 Quick Keys 70 Technical Data 71 Glossary 72 Guidelines for Safe and Efficient Use 76 Warranty 81 Index 85
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Troubleshooting This chapter lists some problems that you might encounter while using your phone. Some problems require that you call your service provider, but most of the problems you encounter are easy to correct yourself. ERROR MESSAGES Insert card Searching 16:21 No network Wrong PIN Matching error PIN Blocked Unblock? Blocked Contact card provider 68 Insert Card There is no SIM card in the phone. Insert a SIM card.
Phone locked The phone is locked. To unlock the phone, see “Phone Lock” on page 46. Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Phone locked Enter lock code Enter lock code Your phone comes with the default security code, 0000 . You can change it to any three- to eight-digit personalized code. See “Phone Lock” on page 46. PHONE DOES NOT COME ON Handheld Phone • Recharge or replace the battery.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Quick Keys Several keys on your phone can be used to optimize the phone’s functionality and decrease the number of times you need to press a key. Some of the key combinations demand that your phone is in a certain mode and some can be made from the standby mode. The table below describes some of the most useful key combinations.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Technical Data General System GSM 900/GSM1800 SIM card Small plug-in card, 3 V or 5 V type Type number 1100901-BV Dimensions Size 130 x 49 x 19 mm / 5.1 x 1.9 x 0.75 in Weight with battery 150 g / 5.3 oz. Weight without battery 83 g / 2.9 oz.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Glossary Advice of Charge (or AoC) enables you to monitor the cost of calls made from your mobile phone. Details of the last call and total calls made are shown in the phone display. Alternate Line Service (or ALS) enables you to have two lines and two different phone numbers on one subscription for your mobile phone. This makes it possible to have separate numbers for business and personal calls.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB A dual band phone that combines the two standards can use both frequencies. This increases capacity in densely populated urban areas, and consequently improves the coverage offered by your network operator. It also offers you enhanced international roaming, thanks to the additional networks now available when you are travelling.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB network or system (your home network), but if it is not in range or unavailable, it will select another system. International roaming is based on agreements between network operators in different countries. Line 1/Line 2 see Alternate Line Service above. Menu System is the easiest way to access all the phone’s functions. The menus are arranged to be accessed and viewed when scrolling with the arrow keys.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Scroll pressing the left or right arrow key to move between the menus. Select scrolling to a menu then pressing the Y E S key on the phone. Semi-Duplex In handsfree equipment, full duplex means that the connection is open for both parties to talk simultaneously. Semi-duplex gives close to, but not complete, duplex functionality. Service Provider a company that provides services and subscriptions to mobile phone users.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Guidelines for Safe and Efficient Use Note! Read this information before using your portable phone GENERAL Since its introduction in the mid 1980s the portable phone is one of the most exciting and innovative products ever developed. With it, you can stay in contact with your office, your home, emergency services, and others. Your telephone is a radio transmitter and receiver.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB EFFICIENT PHONE OPERATION How to use your phone for optimum performance with minimum power consumption: Hold the phone as you would any other telephone. While speaking directly into the mouthpiece, angle the antenna in a direction up and over your shoulder. If the antenna is extendable, it should be extended during a call. Do not hold the antenna when the phone is IN USE.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB ELECTRONIC DEVICES Most modern electronic equipment, for example, equipment in hospitals and cars, is shielded from RF energy. However, RF energy from telephones may affect some electronic equipment. Turn your phone OFF in health care facilities when regulations posted in the areas instruct you to do so. Always request permission before using your phone near medical equipment.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB To reduce risk of electric shock, unplug unit from power source before attempting any cleaning, then use soft cloth dampened on with water. CHILDREN Do not allow children to play with your phone. It is not a toy. Children could hurt themselves or others (by poking themselves or others in the eye with the antenna for example). Children could also damage the phone or make calls that increase your telephone bills.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Use only Ericsson Original accessories. Failure to do so may result in loss of performance, fire, electric shock, or injury, and will void the warranty. • Do not attempt to disassemble the product. Doing so will void warranty. This product does not contain consumer serviceable components. Service should only be performed by Authorized Service Centres.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Warranty If your Ericsson product requires warranty service you should return the product to the dealer/retailer from whom it was purchased. If your Ericsson product requires warranty service when you are abroad, the service is available in those countries listed on your International Warranty Certificate. In the event of difficulty, details of our authorized service network are available from your local Ericsson subsidiary.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB 2. The warranty is not applicable in circumstances other than defects in material, design and workmanship. The warranty does not cover the following: • Periodic checks, maintenance, repair and replacement of parts due to normal wear and tear, exchange of faulty batteries or upgrading of software due to changes in network parameters.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB In the absence of applicable national legislation this warranty will be the purchaser’s sole and exclusive remedy. Ericsson, its subsidiaries and distributors shall not be liable for any incidental or consequential damages for breach of any express or implied warranty relating to this product.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB 84
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Index A Alarm 66 Alarm indicator 13 Alternate Line Service (ALS) 60 Answered calls indicator 26 Answering calls 15 Answering service. See Voice Mail Area information 39 message types 40 receiving area messages 41 Auto store 32 B Banking by phone 23 Barring calls. See Call barring Battery 6 attaching 7 charging 7, 8 removing 9 Battery charger 8 Battery meter 12 Bell.
Handsfree usage 61 Hiding your number 27 Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB Conference calls 52 adding new participants 53 creating 52 extracting a participant 53 releasing a participant 53 reviewing participants 53 Credit 59 Credit cards 63 D Date 33 format 33 setting 33 Dialled numbers indicator 26 Display greeting text 31 indicators 12 language 10, 31 light 32 Divert indicator 12, 42 Diverting calls.
Receiving messages (SMS) 34 Redialling numbers 14 Rejecting calls 15 Request reply (SMS) 37 Resetting phone 30 Restricting calls.
Er ics No so t fo nM r ob Com ile me Co r mm cial un Use ica tio ns AB SMS indicator 12 Speed dialling 25 Stored messages (SMS) reading 35 Storing names 23 numbers 23, 32 T Tape loops.
