Operator`s manual

IMPORTANT SAFETY INFORMATION
13. GROUNDING AND AC POWER CORD CONNECTION -To reduce
the risk of electrical shock use only a properly grounded outlet. The
charger is equipped with an electric cord having an equipment-
grounding conductor and a grounding plug. Be sure that the outlet
is properly installed and grounded in accordance with all local codes
and ordinances.
14.
DANGER
- Never alter the AC cord or plug. If it will not fit in the outlet,
have a proper outlet installed by a qualified electrician. Improper
connection can result in risk of an electric shock.
15. The BML 161 54/1,3 charger 120 Vac line cord has a grounding plug
that looks like the plug illustrated in Figure l. A temporary adapter,
which looks like the adapter illustrated in sketches B and C, may be
used to connect this plug to a two-pole receptacle as shown in sketch
B if a properly grounded outlet is not available. The temporary
adapter should be used only until a properly grounded outlet can be
installed by a qualified electrician.
16.
DANGER
- Before using an adapter as illustrated, be certain the
center screw of the outlet plate is grounded. The green-color rigid
ear or lug extending from the adapter must be connected to a
properly grounded outlet--make certain it is grounded. If necessary,
replace the outlet cover plate screw with a longer screw that will
secure adapter ear or lug to outlet plate and make ground connection
to grounded outlet.
17. Care should be taken when placing the charger in service to insure
proper top and bottom ventilation. A minimum of 1/4" is required
between the bottom of the charger and the surface on which it sits.
5