Installation Instructions

SITE REQUIREMENTS AND INSTALLATION INSTRUCTIONS 7 (28)
BRU1 MANUAL, Doc.no: b1sitreq Uen Rev PA5, 2004-02-19
3.5 Space Required
When deciding where to install the BRU1, it is important to keep the following
in mind:
• The BRU1 must be installed where the delivered antenna gives a good
indoor coverage.
• Accessibility must be maintained to allow installation and maintenance.
• The site shall provide an ambient temperature preventing the BRU1 to
exceed its maximum operation temperature. The ambient temperature shall
be measured 100 mm below the BRU1.
The space required for a BRU1 is shown in Figure 2 “Space required.”. Also
refer to the text below for further information.
Figure 2 Space required.
9
6/1424-LZE 401 204 Rev A
300 mm
300 mm
300 mm
300 mm