Safety Instructions Part 4

SAFETY INSTRUCTIONS 17 (28)
BRU3 MANUAL, Doc.no: 124 46-ANNA 805 08 Uen Rev G, 2003-06-10
8. Lift off the loosened metallic cover. The Beryllium Oxide component is
now visible. Cut the seven pins and the small metallic tongue as per Figure
13.
Figure 13 Locating the seven pins and the small metallic tongue to be cut off.
9. Remove the loosened Beryllium Oxide component by lifting it off as per
Figure 14.
Figure 14 Removing the Beryllium Oxide component from the board.
The component containing Beryllium Oxide is now removed. Steps 10 to 13
refer to BRU3 900 MHz only.
ROA 117 2015/2
R2G
A40A400004R79 95W08
6/2882-LZE 401 197 Rev A
ROA 117 2015/2
R2G
A40A400004R79 95W08
7/2882-LZE 401 197 Rev A