User`s manual

ManualsBrandsEricsson ManualsComputer equipmentC3 MAESTRO LBI-39055

ericssonzericssonz

BI-39117

INSTALLATION AND SET-UP MANUAL

C3 ADVANTAGE DISPATCH SYSTEM

TABLE OF CONTENTS

Page

GENERAL....................................................................................................................................................... 3

COMPACT CEC INSTALLATION ............................................................................................................. 3

FLOOR PLAN ......................................................................................................................................... 3

EQUIPMENT ROOM GROUNDING................................................................................................... 3

AC POWER AND UPS EQUIPMENT.................................................................................................. 3

IN-CABINET DC POWER CABLES.................................................................................................... 4

LOCAL BUS CABLES............................................................................................................................ 4

TERMINATOR BOARDS...................................................................................................................... 4

CONCENTRATOR CARD CABLES.................................................................................................... 5

UPLINK GETC CABLES....................................................................................................................... 5

EXTERNAL CONNECTIONS............................................................................................................... 5

Punch Blocks ...................................................................................................................................... 5

External Cable Length And Shielding................................................................................................. 5

Audio........................................................................................................................................... 5

RS-232/RS-422 Control Data...................................................................................................... 5

Telephone Lines.................................................................................................................................. 6

CEC MANAGER (MOM PC) AND SYSTEM MANAGER CONNECTIONS................................. 6

AUXILIARY I/O OPTION MSDE3U.................................................................................................... 6

C3 MAESTRO INSTALLATION ................................................................................................................. 6

COMPACT CEC POWER-UP PROCEDURE............................................................................................ 6

C3 MAESTRO POWER-UP PROCEDURE................................................................................................ 8

C3 ADVANTAGE DATABASE CONFIGURATION................................................................................. 8

OVERVIEW............................................................................................................................................. 8

LID And GID Databases..................................................................................................................... 8

Site Database ...................................................................................................................................... 8

WITHOUT SYSTEM MANAGER ........................................................................................................ 8

LID And GID Databases..................................................................................................................... 8

Site Database ...................................................................................................................................... 9

WITH SYSTEM MANAGER................................................................................................................. 9

COMPACT CEC SET-UP ............................................................................................................................. 10

DIP SWITCH CONFIGURATION........................................................................................................ 10

Controller Boards................................................................................................................................ 10

Audio Boards...................................................................................................................................... 11

Conventional Interface Boards............................................................................................................ 12

Uplink GETC...................................................................................................................................... 12

Summary of content (28 pages)

PAGE 1
LBI-39117 INSTALLATION AND SET-UP MANUAL C3 ADVANTAGE DISPATCH SYSTEM TABLE OF CONTENTS Page GENERAL....................................................................................................................................................... 3 COMPACT CEC INSTALLATION ............................................................................................................. FLOOR PLAN ..............................................................................................................
PAGE 2
LBI-39117 TABLE OF CONTENTS (CONTINUED) Page INITIAL MOM CONFIGURATION..................................................................................................... SYSTEM MANAGER UPLOAD (If Present) ....................................................................................... TDM BUS AND SLOT CONFIGURATION ......................................................................................... RADIO SYSTEM "SITE" CONFIGURATION .............................................................
PAGE 3
LBI-39117 GENERAL The intent of this manual is to guide field installation and test personnel through the installation and set-up of the Compact CEC and C3 Maestro portions of the C3 Advantage dispatch system. Detailed installation and powerup procedures are included in this manual for the Compact CEC. To avoid duplication of set-up and troubleshooting documentation, the CEC/IMC Digital Audio Switch – Installation, Set-Up and Troubleshooting manual, LBI-38938, has been included with this manual set.
PAGE 4
LBI-39117 this design, one module can completely "downing" the Compact CEC. fail without Since each module has its own power cord, two (2) separate circuit breaker-protected and UPS-protected ac power sources can be employed for optimum power supply redundancy. This is the recommended installation method since Compact CEC operation will not be interrupted if one ac power source or UPS fails.
PAGE 5
LBI-39117 Terminator Boards are plugged onto the appropriate Backplane connectors at the factory. No changes to these boards should be required at installation. ❏ Verify each Terminator Board has not become loose during shipment. Each Backplane should have one Terminator Board plugged to connectors P1E2 and P2E2 (located on the far left-hand side of Backplane as viewed from the rear) and a second Terminator Board plugged to connectors P1E1 and P2E1 (located on the far right-hand side).
PAGE 6
LBI-39117 Telephone Lines Compact CEC audio channels should employ highquality low-noise phone lines or equivalent microwave circuits. All audio channels require 4-wire (duplex) circuits except channels to 2-wire remote controlled conventional stations. C3 MAESTRO INSTALLATION Refer to the C3 Maestro Console System maintenance manual, LBI-39062 or LBI-39100 (sub-manual LBI-39055 or LBI-39101 respectively), for console installation details.
PAGE 7
LBI-39117 4. Connect the two (2) ac power cords, one from each ac outlet strip, to an appropriate ac power source. 5. Simultaneously switch both power switches on the back of the RPS unit to the "ON" position. 6. Verify both "STATUS" indicators on the RPS unit's front panel are illuminated green. A red or amber illumination from one indicator indicates ac power is not applied to the module. Both "TEMP" indicators should be illuminated green. 7. The cabinet's fan should now be tested.
PAGE 8
LBI-39117 screen can be accessed using the function keys and the structured window selection method from the "SYSTEM DISPLAY" screen or by using hot-key "H" from this same screen. The cursor should be on (selecting) the desired interface module in the "SYSTEM DISPLAY" matrix before entering the "HDLC STATISTICS", "CHANNEL B" screen.
PAGE 9
LBI-39117 • • • For each entity, the "PRVLG" (privilege) must be set to "Y" (Yes) so it may be programmed into a communication module. For all entities, set "PVT" (private) to "N" (No). If more than one console is employed and common LID and GID entities are used at more than one console, the ENTITY.DAT disk file may be copied from one (source) console to another (destination) console.
PAGE 10
LBI-39117 correctly at the System Manager. Refer to the EDACS System Manager user guide, LBI-38984, and the CEC/IMC Digital Audio Switch Installation, Set-Up and Troubleshooting manual, LBI-38938, for additional details: ❏ ❏ Group Call Parameters – For each talk group (GID), enable wide area operation and enable automatic tracking operation. This ensures a conventional channel can be patched to the trunked group. Also, disable the talk group's confirmed call option.
PAGE 11
LBI-39117 ❏ If necessary, change the MIM's site assignment number to match the site's Site ID number by setting the binary equivalent at SW1 and SW2. Figure 3 is an example with the site assignment number set to 13 (decimal). Again, the factory setting – site assignment number = 1 – is shown in Figure 2 and in the DIP Switch Settings diagram. A Controller Board must be reset after a DIP switch change.
PAGE 12
LBI-39117 Conventional Interface Boards CI Boards within the CIA Card Cage – Card Cage 2 – have one 8-position DIP switch which allows configuration of the following board parameters: "site" number, test mode enable/disable, watchdog timer enable/disable, and board number. At the factory, before installation into the Card Cage, each CI Board DIP switch is set in accordance with the DIP Switch Settings diagram in this manual (Card Cage 2, slots 3 and 5).
PAGE 13
LBI-39117 ❏ TDM Slot Configuration – See Table 3 for recommended TDM bus time slot allocations. Typically, a console only requires one (1) slot; however, allocating four (4) slots for each console as shown in the table will ensure all CIM audio channels are available when/if Call Director patch equipment is interfaced to the respective console.
PAGE 14
LBI-39117 ❏ Set-Up At The Consoles – At each C3 Maestro console, build communication modules by adding a unit or group to each module as required. See the C3 Maestro operator's manual, LBI-38660 (section ECR-4489) for specific details. LOGGING RECORDER CONFIGURATION ❏ NOTE NOTE At this point in the set-up process, dispatch communications with radio units logged onto the EDACS site is possible. The Compact CEC is equipped with one 8-channel LRIM.
PAGE 15
LBI-39117 NOTE NOTE At this point in the set-up process, if the NETCLOCK/2™ option is enabled, time display at the console(s) and error/warning logging time stamps at the CEC Manager will be synchronized to WWVB. REDUNDANT CLOCK CONFIGURATION ❏ If back-up clocking is desired, this option must be activated by enabling it from the CEC Manager's "MOM Configuration" screen.
PAGE 16
LBI-39117 CABLE INTERCONNECTIONS Figure 5 – Card Cage 1, Slots 1 - 5 (MIM) 16
PAGE 17
CABLE INTERCONNECTIONS LBI-39117 Figure 6 – Card Cage 1, Slots 6 - 11 (CIM 1 - 3) 17
PAGE 18
LBI-39117 CABLE INTERCONNECTIONS Figure 7 – Card Cage 1, Slots 12 - 14 (LRIM) 18
PAGE 19
CABLE INTERCONNECTIONS LBI-39117 Figure 8 – Card Cage 1, Slots 15 - 17 (VMIM) And Card Cage 2 (CIA Rack), Slots 2, 3 and 5 (CCI and CI Boards) 19
PAGE 20
LBI-39117 CABLE INTERCONNECTIONS Figure 9 – Card Cage 1, Slots 18 - 21 (MOM) 20
PAGE 21
DIP SWITCH SETTINGS LBI-39117 COMPACT CEC CONTROLLER BOARD AND AUDIO BOARD DIP SWITCH SETTINGS (188D6170, Sh. 2, Rev.
PAGE 22
LBI-39117 Cabinet 01 CONCENTRATOR CARD PIN-OUTS A01 ---- PINS ---26 01 27 02 28 03 29 04 30 05 31 06 32 07 33 08 34 09 35 10 36 11 37 12 38 13 39 14 40 15 41 16 42 17 43 18 44 19 45 20 46 21 47 22 48 23 49 24 50 25 Concentrator Card AUDIO Connections (To/From External Connections) ------------J07----------SYS 01 AUDIO IN LO LN 01 SYS 01 AUDIO IN HI LN 01 SYS 01 AUDIO IN LO LN 02 SYS 01 AUDIO IN HI LN 02 SYS 01 AUDIO IN LO LN 03 SYS 01 AUDIO IN LO LN 03 SYS 01 AUDIO IN HI LN 04 SYS 01 AUDIO IN LO LN 04
PAGE 23
CONCENTRATOR CARD PIN-OUTS Cabinet 01 A02 ---- PINS ---26 01 27 02 28 03 29 04 30 05 31 06 32 07 33 08 34 09 35 10 36 11 37 12 38 13 39 14 40 15 41 16 42 17 43 18 44 19 45 20 46 21 47 22 48 23 49 24 50 25 LBI-39117 Concentrator Card CONTROL Connections (To/From External Connections) -------J11------- ---------J12--------CRT 01 TX- DATA 422 CRT 01 TX+ DATA 422 CRT 01 RX- DATA 422 CRT 01 RX+ DATA 422 CRT 02 TX- DATA 422 CRT 02 TX+ DATA 422 CRT 02 RX- DATA 422 CRT 02 RX+ DATA 422 CRT 03 TX- DATA 422 CRT
PAGE 24
LBI-39117 Cabinet 01 CONCENTRATOR CARD PIN-OUTS A03 ---- PINS ---26 01 27 02 28 03 29 04 30 05 31 06 32 07 33 08 34 09 35 10 36 11 37 12 38 13 39 14 40 15 41 16 42 17 43 18 44 19 45 20 46 21 47 22 48 23 49 24 50 25 Concentrator Card AUDIO Connections (To/From External Connections) ------------J07----------- ------------J08----------- AUDIO CONCENTRATOR CARD A3 Console Audio (J9) And Logging Recorder Audio (J10) (350A1261, Sh. 14 & 15, Rev.
PAGE 25
PUNCH BLOCK PIN-OUTS LBI-39117 NOTE DO NOT install bridging clips. PUNCH BLOCK PB1 EDACS Site Audio (COLUMN AB) And Conventional 2/4-Wire Audio/Control Signals (COLUMN CD) (188D6170, Sh. 5, Rev.
PAGE 26
LBI-39117 PUNCH BLOCK PIN-OUTS PUNCH BLOCK PB2 Console Control Data And EDACS Site Uplink/Downlink Control Data (COLUMN AB) (COLUMN CD Not Used) (188D6170, Sh. 5, Rev.
PAGE 27
PUNCH BLOCK PIN-OUTS LBI-39117 NOTE DO NOT install bridging clips. PUNCH BLOCK PB3 Console Audio (COLUMN AB) And Logging Recorder Audio (COLUMN CD) (188D6170, Sh. 5, Rev.
PAGE 28
Ericsson Inc. Private Radio Systems Mountain View Road Lynchburg, Virginia 24502 1-800-528-7711 (Outside USA, 804-528-7711) Printed in U.S.A.