EN User’s Manual English
The symbol on our products signifies that they have been certified according to the EMC directive 89/336/EEC, the Telecommunications directive 91/263/EEC, and the Low Voltage directive 73/23/EEC when applicable. The products fulfil the requirements according to the following standards: Cellular Phones and Accessories in Combination: ETS 300 342-1 EMC for European digital cellular telecommunications.
EN Guidelines for Safe and Efficient Use Important: Read this information before using your portable phone General Since its introduction in the mid 1980s the portable phone is one of the most exciting and innovative products ever developed. With it, you can stay in contact with your office, your home, emergency services, and others. Your telephone is a radio transmitter and receiver. When it is ON it receives and also sends out radio frequency (RF) energy.
Mobile telephones may affect the operation of some implanted cardiac pacemakers, equipment for people with hearing impairments and other medically implanted equipment. Pacemaker patients should be aware that the use of a mobile phone very close to a pacemaker may cause the device to malfunction. Avoid placing the phone over the pacemaker, i.e. in your breast pocket. When using the phone, place it at your ear opposite the pacemaker. If a distance of 15cm.
Guidelines for Safe and Efficient Use Assembly Instructions Assemble and Charge – Four Steps 1. Inserting SIM Card 2. Attaching Battery 3. Connecting Charger to Phone 4.
Sending and Receiving Text Messages 21 About Text Messages Checking Subscription Setting Service Center Address Sending SMS About Other Message Types Receiving a Message Reading an Old Message 21 21 21 21 22 22 22 Receiving Area Information 23 About Area Information Activating the Area Information Adding a Code Erasing a Code Changing a Code 23 23 23 23 23 Knowing Duration of Calls 24 About Duration of Calls Viewing Calling Information 24 24 Other Networks About Choosing Network Selecting a Netw
EN Assembly Instructions This chapter describes how you assemble the phone, what the SIM Card is, and how you handle the battery. Assemble and Charge – Four Steps ● Insert the SIM Card. ● Attach the battery. ● Connect the charger to the phone. ● Connect the charger to the mains. 1. Inserting SIM Card Removing SIM Card Place the SIM Card with the golden connectors facing down and the cut corner turned to the left (see Figure 1). 2. Slide the SIM release button towards you (see Figure 2).
2. Attaching Battery Place the battery on top of the phone and push until you hear a click (see Figure 3). Removing Battery Disconnecting Charger 1. Make sure the phone is turned off. Lift the plug up and pull it out (see Figure 5). 2. Press the locking catch on the bottom of the battery (see Figure 4.). 3. Lift the battery up and away from the phone. 1. 1. To mains 2. 2. Figure 3. Attaching battery. 2 Figure 4. Removing battery. Figure 5. Connecting and disconnecting charger. 3.
About the Battery and the SIM Card When you connect external power to the phone, the battery is charged. When the battery is fully charged, the charging stops. You cannot overcharge your battery. The Battery Your phone is supplied with a Nickel Metal Hydride battery. The battery is not charged before shipment, even though there might be enough power to turn the phone on. When you are charging the battery you can use your phone as normal; however the charging time will be longer.
About the Display Your phone display will help you to: Verify that you are dialling correctly. ● Check your battery status. ● Check your signal strength and service availability. ● Indicate that you have received messages. Table 1. Description of display icons. ● Icon: Indicates: Network The name and country of the network. Signal Strength The received signal strength in five steps, depending on the strength of the signal.
EN Learning about Your Phone 1. 2. The parts list corresponds to Figures 8 and 9: 1. Antenna 2. Status light 3. Earpiece 4. Volume keys 5. Display 6. Keypad 7. Microphone (inside) 8. Flip 9. Microphone channel 3. 13. 4. 5. 6. 12. 7. 10. Charging connector 11. Battery 12. SIM release button 8. 13. Phone clip 11. 10. 9. Figure 8. Front view of your phone. LZT 126 1343/2 R1A Figure 9. Semi-back view of your phone.
Making and Receiving Calls This chapter describes how to make and receive calls, how to make international and emergency calls, how to show or hide your phone number when calling (CLI – Calling Line Identification) and how to handle two calls simultaneously. Making a Call 1. Enter the area code and phone number. The phone number is shown in the display. If the number is longer than 10 digits, the beginning of the number will be shown as an arrow (see Figure 10). Figure 10. Number with more than 10 digits.
If you have been unable to answer, or you have rejected a call, the number of the unanswered call will be shown in the Missed Call menu. Putting a Call on Hold ● Press YES to put a call on hold. To put the call off hold, press YES again. About Calling Line Identification (CLI) The Calling Line Identification service shows the caller’s phone number when you receive a call (you have to order this service). If the caller’s name is stored in your phone book, the name is displayed instead of the number.
Making a Second Call while a Call Is in Progress ● Enter the second phone number and press YES. The first call is put on hold and the display looks like this: 1 On Hold Receiving a Third Call You can do one of the following: If you are engaged in one call and have a second one on hold, you may receive a third call. You will hear a tone in the ear piece and CallWait is shown in the display.
EN Navigating the Menu System This chapter describes how you navigate through the menu system to get maximum use of your phone. About the Menu System Moving Through the Menu System You control the functions of your phone by a menu system. Use these keys to move through the menu system and to find the different menus. Some menus have sub-menus that have individual settings. If the menu has sub-menus, three dots appear after the menu name. See the example below: Barring...
Menu Overview RecallName Ring Vol Store Info... ReadMm... MissedCall SendMm... Set Alarm AreaMm... Set Clock EditMelody DivertLine Ring Type Networks Key Sound Locks... Key Lock Barring...
EN Creating Your Own Phone Book This chapter describes how you can store phone numbers both on your SIM Card and in your phone’s own memory. About the Phone Book You can store your phone numbers both on your SIM Card and in your phone’s own memory. The difference between the two is you can remove the SIM Card and use all those telephone numbers in other phones, while phone’s memory always stays the same no matter which SIM Card is inserted. You can store up to 50 phone numbers in the phone memory.
3. Press # to recall number. About Recalling Phone Numbers Position Recall You can recall a phone number any time from either the SIM Card or the phone memory. You can recall the phone number by either the name or the storage position number. 1. Enter the position number and press #. 4. Press YES to call the number, or scroll until you find the number you want to call and press YES. 2. Press YES to call the number, or scroll until you find the number you want to call and press YES.
Your phone can store at least the 5 last dialled numbers. The most you can store depends on your SIM Card. Recalling From List of Last Dialled Numbers 1. Press CLR to erase any digits from the display. 2. Press YES. The number last called is shown. 3. Press YES to call the number or scroll to the number you want to call. About Unanswered Calls Sometimes you are unable to answer a call. Then the phone keeps track of your latest missed calls in the MissedCall menu.
2. Press the right or left arrow to listen to the different ring types. Use the volume keys to scroll silently. 3. Press YES to select your preferred ring type. Viewing the Clock If you want to view the time on your phone, press one of the volume keys on the side of the phone. Setting Clock 1. Select the Set Clock menu. The display now looks like this. 14:30 2. Follow the instruction table below on how to set the clock. (Set hours before the minutes.) Setting Alarm 1. Select the Set Alarm menu.
EN Making Your Personal Ring Signal This chapter describes how you can make your own ring signal. You will find one example of how to make a simple melody and one example of a little more complex melody. You will also find a table of sample melodies that you can use. Your phone has the capability to handle a range of tones spreading over two octaves. Look in Table 3 to understand which notes and other notation corresponds to which keys. Figure 13 also explains which key goes with which note on the keypad.
Complex Melody The complex melody is Twinkle, Twinkle Little Star — first section. This section corresponds to F, F, C, C, D and C tones on a music scale. Making Twinkle, Twinkle Little Star 1. Select the Edit Melody menu. Your display now looks like this. _ 2. Press the 4 key twice. The display now looks like this: 5. Press and hold the 8 key until you see a capital C with a plus sign in the display. The display now looks like this: ff_ c+c+d+d+C_ 3. Press the 8 key twice.
EN Diverting Calls This chapter describes the divert function. As a reminder, the display will inform you about any activated call divert each time you turn on the phone. Your standby display now looks like this: Viewing Status of Call Divert About Diverting Calls 1. Select the DivertLine menu. When supported by your service provider, you can use the DivertLine menu to divert (forward) your calls to another number, for example your voice mail or home phone.
Protecting Your Keypad, Phone and SIM Card This chapter describes the different locks that you can use to protect your phone. These are the only ways of protecting your phone in case of theft. About Locks Your phone has three types of locks: Keypad lock (does not protect in case of theft) ● Card lock ● Phone lock The card and phone locks are found in the Locks menu and you find the keypad lock in the Keylock menu.
The phone lock protects the phone against unauthorized use of the phone if there is theft. The phone lock is not activated when you buy the phone. These are the two types of phone locks: Autolock: you need to enter the phone lock code every time you change SIM Card in the phone. Changing Phone Lock Code 1. Select Phone Lock in the Locks menu. 2. Select New Code. 3. Enter 0000 at the prompt (the factory default code) or your own code and press YES. 4.
Note! To activate any of the barring functions, you need a password that comes with your subscription. Activating Call Bars for Any Call Type 1. Select either Incoming or Outgoing call bars from the Barring menu 2. Select the barring option you want. 3. Select Activate. 20 4. Enter your password (provided with your subscription) and press YES. 2. Enter your password at the prompt and press YES.
EN Sending and Receiving Text Messages This chapter describes SMS, what you need to do before you can send messages, how you send messages, and how you read messages. This service is network dependent. About Text Messages want to receive messages, you do not need to do anything. The Short Message Service (SMS) function allows you to send and receive text messages that contain up to 160 characters.
the message into the following types (if supported): E-Mail The E-mail address cannot contain more than 20 characters. Reading an Incoming Message 1. Press YES when you have received a message. Telex Fax Both group 3 and 4. X400 Voice Changing Message Type 1. Select Options in the Send menu. 2. Select Msg Type. 3. Select the message type you want.
EN Receiving Area Information This chapter describes how you can make your phone available for Area Information (AI).This service is network dependent. About Area Information At present the following message types exists: Adding a Code Code Title 1. Select EditList in the AreaInfo sub-menu.
Knowing Duration of Calls This chapter describes how you can keep track of the duration of your calls. The duration of the call appears in the display after a call is finished. The total time of all calls is recorded in the phone and is also default. About Duration of Calls Your phone is capable of keeping track of the following: Viewing Calling Information Total Calls: This feature shows the total time of all calls in hours and minutes since the meter was last set.
Display: Meaning: Network and # home network Network and * currently used network Network and A other available networks Network and S other available network (given priority by your home service provider) Network and F forbidden networks Auto automatic network search LZT 126 1343/2 R1A Note! The status of forbidden networks can change, so it is important that you make a network search to update the list, especially when you are visiting another country.
26 LZT 126 1343/2 R1A
A C AI Call wait Calling line identification Calls answering barring diverting, about duration emergency ending hold international making outgoing price receiving rejecting restricting total Charger connecting connector disconnecting function CLI Clock setting viewing Complex melody See Area information Alarm setting snooze turning off Answering calls Antenna Area information about activating adding codes changing codes erasing codes Assembly Assembly instructions Autolock 14 14 14 6 5 23 23 23 23 23 2
I International numbers storing International prefix M 11 6 K Key sound changing Keypad lock unlock Keypad lock turning off 14 5 18 18 18 L Language display, changing Language reset Last dialled about numbers recall Letter icon Line indicator icon Locks about keypad phone SIM 14 14 13 13 4 4 18 18 19 18 Mains Making ring signal Making calls Melody complex simple Memory phone SIM Menu system about overview Message type changing Message types e-mail fax telex voice X400 Messages See Text messages Microp
Recalling by name by number Receiving calls Rejecting calls Ring signal icon personal See Ring volume Ring type about changing Ring volume changing muting Ringing alarm Roaming 12 12 6 6 15 4 15 13 13 13 13 14 24 LZT 126 1343/2 R1A 21 18 4 3 1 18 1, 5 1 15 9 9 21 Telex Text message about erasing going through reading saving sending types Turning off phone Turning on phone Two calls 22 21 22 22 21 22 3 3 7 U 14 12 Unanswered calls Unblocking 13 18 V 11 11 T S Scroll Select Service center setti