User`s guide

6(11)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
99-07-15 D
107/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Commands for intrusion
a - Trunk parameters
1007
Break-in allowed?
(accessible only via RASC)
This command states whether or not intrusion shall be
permitted during an ongoing call. However, intrusion is
never permitted for data communications.
xxxx enter the trunk’s directory number
z =Yes, intrusion allowed
=No, intrusion not allowed (default value)
b - Define facility digits
2406
Executive intrusion
(accessible only via RASC)
If an extension encounters busy on a call to another
extension, the extension can initiate intrusion by
pressing a predetermined key.
This command defines the facility digit for intrusion.
Only extensions with a service category permitting
initiation of intrusion are allowed to initiate this facility.
See command 3004.
Intrusion can only be executed, if the category of both
parties in the ongoing call permit intrusion. See
command 0107 and 1007.
If the digit has been used previously for another facility,
it will be erased, i.e the “old” facility will be removed
from the system.
Equipment
No additional hardware required