User`s guide

2(3)
Datum/Date Rev
Dokumentnr/DocumentnrUppgjord/Prepared
Dokansv/Godkänd - Doc respons/Approved Kontr/Checked Tillhör/Referens-File/Reference
97-10-31 B
112/155 34-ASB 150 02 Uen
FACILITY DESCRIPTION
Faktaansvarig - Subject responsible
Limitations
If the trunk has no programmed answering position an
incoming call will be signalled only on those external
line keys that have been programmed for the trunk.
If the answering position is busy, the call can be
camped on or diverted to the alternative answering
position.
Programming
1101 - 1104
Programming of answering positions
Each individual trunk can be programmed for four
different answering positions.
An answering position can be a/an:
• Extension number
• Group - (PBX) hunting number
• ACD number
• Fictive number
• Voice answer number
• OPERATOR queue
On initiation of the system all trunks are automatically
assigned extension 200 as both standard and
alternative answering position
xxxx Enter trunk's directory number
zzzz Enter directory number of relevant
answering position
Repeat the above procedure for commands 1102 -
1104.
Following commands are only accessable via
RASC:
1009
Rero on answ pos barred ?
Each trunk can be programmed so that diversion (re-
routing) to an alternative answer position can take pla-
ce if the ordinary answer position is barred.
1010
Rero on answ pos blocked ?
Each trunk can be programmed so that diversion (re-
routing) to an alternative answer position can take pla-
ce if the ordinary answer position is blocked.
1011
Rero on answ pos vacant ?
Each trunk can be programmed so that diversion
(rerouting) to an alternative answer position can take
place if the ordinary answer position does not answer.
1012
Rero on answ pos busy ?
Each trunk can be programmed so that diversion
(rerouting) to an alternative answer position can take
place if the ordinary answer position is busy.
1016
Reroute on no answer ?
The command is used for direct in-dialing and private
trunks for rerouting of incoming calls to the rerouting
position if the destination required does not answer.
If "No" is programmed ringing will continue at the
selected extension. For rerouting to take place it is
necessary the rerouting position has been
programmed, see commands 1103 and 1104.
10 Jul 14:40 +15˚
ANSWERING POS.DAY 1101 xxxx zzzz
backward forward c/i return